Search:

Correct

What I saw with the Pieces that wouldn't fill was that they were 2 separate paths. So I had to weld the 2 paths, fill with color, (color fill does not work yet), auto close, (now color...

For clarification are you saying the parts won't fill in Corel or is it just not engraving.

What I do is try to fill the shape as the test. From the pic It looks like I would start with ungrouping...

Should not cause a conflict.

Run your job with the spindle up & off and that should take it out of the equation. If need be you can disconnect the wires to be 100% sure.

Things to check:
On...

Now you guys will be accused of having a meltdown.

Lee case holder and lock stud in a vise on a drill press. Use a piloted counter bore bit or the Lee shell cutter and modify the length of the Lee length gauge. You just need to locate the case safely...

Jeff,
I reached the point some years ago that I don't ever want to use a pantograph again, for anything or any reason. In my case a pantograph is not worth the space it takes up.

Thanks for the replies. I didn't want to bump this back to the top, but I definitely wanted to thank you guys.

Title pretty much sums it up. Are GCC Lasers still supported in the U.S.? Somehow I am under the impression the GCC's / SIGNWarehouse Pinnacles are not well supported.

Long story short is I have 2...

Swap the X & Y motors and see if it replicates, provided motors are the same.

Nice & rounded looking. I was thinking raster in rubber stamp mode with settings to get it rounded.

I didn't get a good look at the trike but it is the green tired thing. I have seen karters put...

That is cool. I wonder if the vector cuts will cause splitting.

It reminded me of the tire guys cutting sipes into slicks to make intermediates out of them. They would use them instead of rain...

The production cost and time is the same. Your development time is separate.


That is a choice you have, as long as you know what you are giving up/gaining. If you don't know then it can be a...

Nice project. I know so many Chevy guys my first thought was it's missing the bowtie. I really like the red on yours. Then again you can't necessarily go by me, I like Plum Crazy, Green Go & Sublime!...

Thanks for the answer. No problem. I didn't know if you had gotten to it after the holidays.

I took off between Christmas and New Years and had a really hard time going back to work. January was a...

Can anyone enlighten me? Did it go away?
I replied to the thread via instructions ( Email, FIBER LASER --) and received an initial email. I sent a follow up email and after a reply, never heard...

I am impressed.
I love some of the Youtube comments:

"When he was repeating "a tool to..." I was praying he wouldn't say "make the world a better place" lol."

"I'm throwing money at the...

That is what always struck me as well. A person gets into a business due to the profit potential. Then the plan is to cut the profit out to get more business. So cut profit to make profit is the...

Why don't you try engraving on the back as a starting point? I know the front is different, but you should be about halfway to the answer trying the back.

CorelDraw is the default standard most laser engravers start with. Vector images are usually best, then bitmap. If a bitmap, then higher resolution and larger is better, not a 72 DPI thumbnail...

Kind of hard to say without seeing. You have at least 2 sides with end grain so that maybe what is going on.
I don't see how the company owner should sensitive about answering the questions...

You have me laughing and wondering at the same time.

Let us know how it works. It comes with free goggles, a $4.99 value!

I like the way the larser head is attached. It is pretty cool the way they used disk drive components.

Well you can't fault...

Mr. Howard,
RE: "i have heard some strange things about xenetech."
Like what, if you don't mind me asking? Feel free to PM me if you prefer.

Jason,
That is a funny statement. It is very much an overstatment, but funny. No offense to you or Bert intended by me.

I did have a customer bring up the glow forge today. I gave him a link to...

I have found them to be contrary. When needing to remove a mark they become permanent. When you want them to be permanent they bead up and won't even leave a decent mark.