Search:

No idea, she bought it for $50 at a yard sale. She says she's found no markings of any kind on it anywhere.

I've never run across one - my daughter is refinishing an old cabinet that has these hinges on the bottom doors. Anyone know anything about these? Thanks in advance,463713

463712

Not really looking for more power per se, looking to reduce the overall amperage draw on the shop line if I need to. The conversion to 220 from Laguna includes a new control board, which should take...

I’m not sure yet ... I’m trying to run on a tight electrical budget (I ran a 60 amp feed to my shop). It remains to be seen if the CFLUX causes me any trouble in that regard. I’m just trying to...

Anyone changed over from 110 to 220 on one of these? I’m contemplating it and wondering if it’s within my capabilities vs. hiring an electrician as they seem to recommend. I can follow...

Thanks Gene, nice video ... so now I know it can be done, all I have to do now is figure out how :)

I'm making a butcher block top for an extended kitchen island (34 x 60) and the client wants a 12" leaf that folds flat out of the way. I'm looking at the butterfly leaf designs and wondering - does...

Thanks gentlemen, appreciate the thoughts and opinions. I've attached a pic of where I'm at so far just for grins264788

I'm working on a new bench top, 4/4 Ash, and wondering if a nice addition might be some T-track in the top. Thoughts? Anyone else done this?

I know new does not equate to perfect and that it will take some dialing in. I have nothing against old iron - I just kinda had a hankering for a new new one more than anything. I don't have the...

Best tablesaw value today for under $2K, prefer new vs. used and I have built up no significant brand loyalty so nothing would be off the table.

Sanded to 600, gel stain, 5 coats of semi-gloss poly sanded to 600 between coats. Then I let it cure for 10 days, then wet sanded with micro-mesh up to 12000, then rubbed the finish with pumice,...

My first real try at a hand rubbed finish

Made this over the weekend from an old copy of Woodsmith magazine. It wasn't as easy to get the top "right" as I thought, but it came out kinda OK.