It's a circular saw angle guide made by Central Quality Industries.
Woodcraft sells one. There is a Japanese model called a Shiniwa.
Look on eBay for "circular saw angle guide" and you will find...
Type: Posts; User: Ben Reese; Keyword(s):
It's a circular saw angle guide made by Central Quality Industries.
Woodcraft sells one. There is a Japanese model called a Shiniwa.
Look on eBay for "circular saw angle guide" and you will find...
Well, guess I couldn't stand it any longer so for my birthday I treated myself to the HTK-706 jig after watching a few videos on YT. Figure if I don't like it I can sell it and go back to hand...
Geoff, I notice in your post that you mentioned getting a riser block for your Delta "if you can find one". I just checked and there are 6 on eBay from $219 to $269 for the kit. Hope this helps....
Have a Tormek T-7 on the way. I've been sharpening turning tools, chisels and plane irons on a Grizzly 8" up until now. Think I'm really going to like a "top end" machine.
I was looking at some...
Thanks for the advise folks. After much thought and research, I sprung for a Carter Upgrade Kit last night for $179 plus shipping. I've not used guide bearings before, only bushings that came on...
No Doug, it's the whole assembly. There is one on eBay for $110 and I am really getting tempted to spring for it. I mean, what else can go wrong that would need repair. I have motors laying around.
My Old Delta 28-245 bandsaw has a broken lower blade guide assembly, which of course, is no longer available. I found one on eBay but it was over $100. I really think that it is time to buy a new...
My grandparents old house was built over 100 yrs ago and has cedar shingles on the roof. Still water tight. I have a farm that I bought and porch posts were cut in 1981 and they are still good. ...
Have a chance to buy a Grizzly 8" wet grinder #10097 with a Tormek gouge jig which sells for $89. Guy wants $125 for it.
...
I almost bought the PC but went with a Dewalt 8 yrs ago. In fact I keep 2 of them in my shop. I use them so much that I have had to replace the velcro pad a couple of times on one of them. The...
Charles is absolutely right about Craigs list as a great place to get a starter saw...I am about a month away from putting my Jet on Craigs after I finish refurbing my 1973 Unisaw, that I bought for...
It is not only a matter of support when crosscutting but as a matter of support when ripping narrow pieces or using a molding head cutter or a dado blade as well. The support for the dado when...
I live in Ft. Mitchell, Ala. It's below Phenix City, Ala and Columbus Ga. Only things I've seen around here are the old C-arm Delta's and old Craftsman. I may be wrong, but with those choices I...
I think that it is getting time to replace my Dremel 1680. I use my scroll saw occasionally, though not as much as I used to. I would like to get a good, easy blade change, minimum vibration scroll...
If you do not want to hot glue it then I suggest double sided carpet tape to hold it in place. This would be if you are using a band saw If you are going length wise I suggest the affore mentioned...
I sharpen alot of knives for friends and family (not professional) I sharpen a few garden tools, machettes, axes etc. and a chisel or two. All by hand. Occasionally a garden tool on the bench...
Just did this on my 14" Delta. Invest in the urethane tires (orange) I got mine from Rockler and got free shipping. It's a little difficult to put them on because I have super arthritis. So I took...
Kevin, the same thing happened to me in '65. Lost the end of one finger and cut into another. I have tried the guard on my Jet saw and finally left it off because it rattled and was in the way. I am...