Search:

wont be fun to watch the birds having their way with it

it appears not to be centered in the wall

id like to get the plans. thanks

to follow up on by baffle install:

I installed a baffle in a Harbor Freight DC unit that uses a Wynn 0.5 micron filter. I installed the baffle made from 3/4 MDF in the center section of the HF...

OK. those are good points. I did gorg the machine no doubt. I can try again and post some pics this weekend and weigh before and after when testing with a more gentle dust stream.

I installed the baffle in the HF 2hp DC just this evening. I cleaned the Wynn filter prior and had about 1gal of fine dust. I sucked the same 1gal of find dust up after the mod. I thought still...

thanks for that. I dont think I could remove the filter with the baffle in place if I have turnbuckles as you cant reach them then. Im going to add a thread rod down the center

I see..thanks. I have a small rubbermaid can before the 2hp HF DC to catch the big chucks so that dont bend the impeller blades. I can see it slightly suck in on itself but its plenty strong to...

If if do a chip collector can, how do you seal the top so its still easily removable...either with a metal or rubbermaid can?
thanks

these Wynn filter dont stop being effective do they have they get clogged and cleaned out several times?

I have a 0.5 micron Wynn filter in my dust collector. Before I changed the bag, the other day, I cleaned the filter by tapping all around it with a dead blow and blowing air from outside being...

no brushing lacquer at all in the hardware stores. The paint store has gallons of lacquer though. . hardware stores have plenty of lacquer thinner butno lacquer.

ok..thanks!

If have much experience w/HVLP lacquer and brush on poly like Deft.

I have made some chairs but thought a lacquer might not durable enough and brush on poly leaves drips and brush marks especially...

there are no such things a 1 micron canvas bags. its impossible. The specs for that machine say 30 micron

I use the Harbor Freight ear protection for $2 on sale. I also have a very expensive set of ear muffs for shooting but the HF versions provide more attenuation and are move comfortable. It could be...

really think about adding a pleated filter vs the 30 micron bag. I noticed there is one bag and a plastic bag catcher. The pleated filter will add about 10x the available air exhaust flow making...

the Harbor Freight 2hp DC with 30 micron bags is $125 if you get it on sale and apply the 15% of coupon. They are all the same design and probably the same chinese mfr. YOu can retrofit it with a...

I glue milled 4/4 lumber together. I think it turns out to be cheaper then buying 8/4 etc.

I have a 6" x 4" flat scraper that has become invaluable. How does one go about sharpening something like that?
thanks for any input

I wouldnt want it. Use up too much room for no use. Cant envision a use for it. Dont even think they make RAS anymore.

I bought this detail sander which Ive used once and is otherwise useless. I dont even think they make those anymore. Cant think of any others that have been a total bust. I research pretty...

4" works exceptionally well. for a small shop, 6" is not justified based on impressive performance of smooth bore 4" pipe, the significant added cost for metal or 6" PVC and the room the large...

lol. Termites will never leave. They will keep pushing terminte poop out the holes they make in the fine cabinetry you make from the wood

I havent used a corded 1 hand drill in 15 years.