Search:

Do a Google search for Chicago Dowel. Thay can help you.:D

Some of the noise on slowing down could be a blade brake also.

Some electric companies do use a Demand Rate for commercial customers. This is a charge totally seperate from Kwh usage. It is based on the highest Kw usage for any 15 minute period in the billing...

What kind of saw is it?? Radial Arm. Band. Table. Scroll.?

I may, but do not have the model numbers memorized.

Nice!! Natural light is wonderful.

The vintage horses were stronger than the modern horses.

I guess it is possible, but the static cling on the shavings will be a mess.:D

If it draws 21 amps, you need a 30 amp breaker with 10 ga wire.

How does it cut?? That is what really matters isn't it?? If it cuts well, and the blade tracks true, the runout should not be a factor.

Brookside Lumber in Bethel Park has carried it in the past. Give them a call and see before you go.

This is one of those deals, the more work you do, the more stuff you break. The guys in my shop, and myself, have broken screw tips, drill bits up to 1/2", router bits, sanding belts, and most other...

Thumbnail works fine here too.:)

The total weight compared to a car is irrelevant. The potential problem is the footprint (pounds per square inch of bearing surface), and the vibration over that footprint.

Do you know how thick...

I think I will have time this weekend to put it together. I will try it out for a few days next week, and post results.

Thanks to all who posted on this thread.

We have been using more and more air in my shop building rustic country furniture. We are now up to a 3 man operation, and some days use a lot of air. I am usually spraying most of the day, and one...

What size planer are you talking about??

You may need to drill a small hole in the lowest point of the light housing. water will drain out, but none should find its way in through that hole.

Mercedes Sport Utility Vehicle??

I have always wanted to build a set of snowshoes. Cool bends, and rawhide lacing.

Most of the larger saws drill away weight to balance the wheels, this way there is no chance of the balance weights falling off, or flying off and causing larger problems.

1/8" is not really strong enough to hang much weight on either.

Is it running on an extension cord? Possibly low voltage to the motor if so.

Ahack saw would work, but why would you want to? You can never make them longer again.

I have broken a few over the years both in a handheld router, and on the CNC.

Centaurian tools. The spelling may be wrong. They are located in Luray Virginia. They have a pretty good website, and fast shipping. I have been using their end mills on my CNC for 2+ years, and...