Search:

I must be missing here.

I don't know about your home heating system; but my system sucks air out of the house, down into the filter system then down into the heat/AC and back into the house. It...

I am not asking for suggestions. I only want to know if which of these two brands are the best.

Deleted -- I give up

I have the kreg and have been very happy with it. It is rock solid and very accurate.

However that being said if I was to purchase a miter fence today I believe I would choose the incra 1000se...

I think this a local pickup only.

Checking the listing's body and he states he was unable to get the no shipping option to work.

What is causing some of the pages to disappear when I login. I was viewing the thread "I was trying to avoid posting this - General jointer damaged by" as an unlogin viewer and noticed some new...

My guess is folks who registered they tools are notified. Since I never register my tools notification is not expected nor IMO worth it.

I had to replace the motor on my 514X and found it to be very simple. The bottom wheel does not have to be removed nor do I recommend removal as the weight saved is very marginal.

The removal...

It could be as simple as switching type of screws. If you are using kregs course screws on hardwood, spliting is quite common. Try using the kregs fine screws and I wouldn't be supprise to see your...

:) Ok for us dummies! please explain what a catalyzed finish is.

I have mine installed in a shop fox mobile base with any problems. I did have to inset 1/4" steel plate between the bandsaw and the mobile for the bottom door to clear the bolts on top of the base.

The only reason hp is so hyped IMO is for the few serious woodworkers working with extremely hardwoods or the impatient user. That being said any hardword or wood can be cut with a underpowered tool...

How about a curio cabinet for those special keepsakes.

David

1" is available but since I am on the left coast I can only suggest that you inquire at some of the local cabinet shops as to where they acquire they sheet goods. Most cabinet shop sheet...

Dan

IMO I have found most power tool makers bits and blades to be second rate and not worth the cost. I believe that is because they spend most of their money on tool development and the bits and...

Interesting you should ask! I stopped in at woodcraft today and asked about the clamps. They had so 50 ers in stock so I was able to visably see and feel the differences. I was told they are they...

John

You might want to take a look at the Grizzly 514X over the 566. I was looking at the 566 until the 514X came out felt the 514X was a better value for the money. Main difference that I...

Art

I am not aware of any place in Medford but you might try 'All Native Hardwoods' in Roseburg. (I have never been there but was told they have good select of exotic as domestic hardwoods)

I...

Congrats. You will get a lot of enjoyment out of them.

Do you need a jointer? No not if you have a planner and get a top quality saw blade. I do not have one (never had) and have made...

Mark

I can't help but ask!

Since you plan on keeping the saw on the trailer have you taken into consideration the wear and tear the motor mount trunions will be subjected to by hauling back...

Don't forget you can adjust for your time zone by going to your loged in User CP and select edit options, then in the date and time zone option select your local time zone.

When you have made the...

Scott
The K3.550 is the model number for the 50" clamps and K3.560 is bessey's model number for 60" Thus for the extra $5 you are getting an additional 10" of clamping space

Been there done that!

Nothing like to blade mounted backwards to make ya feel a idiot! :D :D

Louis

I have had the 1617 mounted under my router table for 2 years and have yet to experience any of the problems described. I do blow my router out every few weeks to insure dust does not...

Very, Very nice. I am sure your BIL will get many years out of it.

Dave