Search:

Those are both great ideas, but since it weighs in at 54 lbs. I think I'll try Jerrys suggestion first. Thanks to both of ya for your input.

Anyone ever tanned cherry with a grow light ?

I've got a 24" x 36" x 2.5" edgegrain top finally glued up, 1/3 is cherry w/ walnut and sepele. The cherry is quite abit lighter, I know that the sun will darken it but my question is- If I place...

Glued up 1/4 of my edge grain butcher block top :) and when I removed the clamps (Jorgenson) there is a spot left on the wood :eek: where the plastic pad from the clamps made contact, looks like a...

I have the same situation, 95+ is kinda hot for woodworking. I've been thinking of getting a window unit and set it on a low profile dolly and when I need it just raise the garage door up enough for...

Chris, I've had the same thing happen with my 1023, I've had to pound it back many times but now I just snugg it up real good and so far its beendoing ok.

Thanks for everyones input, that gave me some ideas, I put the toe-kick on it to match up with his existing kitchen cabs, since I have already cut the frame height I figure what I can do is make a...

I just started making a kitchen island out of Pecan with a 24" x 36" x 2.5" edgegrain, butt joint, butcher block top made with Walnut, Cherry and Sepele. The cabinet is 20" W x 32" L . All this will...

When I did my table last year I had 4 bolts threaded into the top of the pedestal that protruded thru a 3/4" piece of plywood that was fastened to the table slides, tightened down with washer n nuts....

247720247721247722247723Dave, I did a 47" table last year w/ 2-15" leafs and used the equalizer slides, they work quite well. With both leafs in I havent noticed any sag and it would take alot of...

I prefer to use a PVA glue, but from what I've read, epoxy is better at filling gaps. Some of my joints are not real snugg and some that are still have gaps. Due to numerous pieces and...

In the process of making 6 chairs w/cherry, which are out tanning now. I plan to wipe down with BLO, then dry fit and spray 2 coats of garnet shellac (1st x spraying chairs/shellac). Then glue up...

Prashun, congrats on your BS, I got the same 514 1 1/2yr. ago, its been a great machine, you'll love it.

I have a 8 sided pedastal that a fried wants me to re-glue, about 1/2 of the pieces have come apart. A light hammer tap knocked the rest of them apart. The glue surfaces had some kind of white...

I have heard that if you mix shellac flakes w/Isoprophyl instead of DNA (100% or combo, don't know) it will slow down the drying and would be better when spraying in hotter weather, especially with a...

Thanks for the info, I'll give it a shot.

Any Earlex 5000 owners out there that have sprayed the EM6000 ? Planning on doing this soon, have never used the 5000 for WB coating and was wondering about the Do's n Dont's. Appreciate anyones in...

WoW! Roger, that is some beautiful work. What kind of finish do you plan for it?

Yes John, I did make the pedestal, I added extra blocks on the inside to give added support for the tenons, the only thing I did'nt make was the equalizer slides. 228245228246228247228248

Little late in getting pics out, this is the table that I had a finishing problem with but it ended up coming out good. Finished it just in time for Christmas Eve dinner. First X working with WL SF,...

I made the FWW sled by Keith Rust and it worked out quite well.

"Nice work. I suspect this was much harder to build than it appears at first glance. Getting all those angles cut that perfectly would have driven me crazy (okay, crazier...)"

At first I thought,...

This is a weekend project I threw together last weekend from scrap cherry wood with a Walnut dye stain and 3 coats of GF aqueous Satin.222966222967222968

Picked up a set of the flip down casters for your work bench from Rocklers, on sale. These things are awsome, making my bench mobil now makes it alot easier to get to things stored behind it. With...

My first sled I did I used BB with wooden slides, the BB ended up not being flat. I replaced it with a sheet of Phenolic Resin Plywood from Rockler, very nice and flat. But like Bill said, the wooden...