Wondering why my photo’s don’t show here any longer? Some change to the software ? Not worthy ?
Type: Posts; User: Paul Girouard; Keyword(s):
Wondering why my photo’s don’t show here any longer? Some change to the software ? Not worthy ?
To Festool:
411148
Small sander and Midi vac. The company I work for resenting picked up a Domino , so it made sense to get a vac when I want to use the Domino in my shop.
We also...
LOL, We settled on the 500 with a Midi vac and a sustainer full of Domino’s!
When does the Goldilock’s 600 get released?? ;-)) It sounds like the perfect tool!
Good to know Randy , and all you others for your input.
I think we’ll go with the 500 and the mid sized vacumn.
Although so far on the Festool site or amazon I haven’t found a package deal...
Feed back i’ve Gotten from three other guys who have 500’s is the 700 is really big and generally , unless you built a lot of gates or doors the 700 would be over kill and well just a bigger tool to...
There’s a few reasons , my two subs who started the trim out had to move to other projects , we are blessed currently with to much work all in the same phase of construction, trim
out.So they had to...
Not sure why the photo won’t show up ?? 410111
Looking at this set up. Do you have the 500 or 700 series?
410110
Where getting it for a White Oak job , mitered casing , thinking the 500 would be better for trim/ cabinet work and...
It will be a job site tool, so it will need a vacumn to travel with it.
So if one drinks the Koolaide , what vac would one get to go along with the 700 series Domino?
Soss hinges would work as well.
402878
Euro hinges would be the most user friendly hinge mentioned so far.
Soss hinges and knife hinges can be demanding to install , and...
Good luck.
Here’s your original thread. When you can’t find a thread you started use the forum tools by clicking on your name, that will pull up a section where you can select items such as your last post ,...
Good luck !
Top drawer should be solid fronts. IF they are stained grade it looks better if the drawer fronts are grain matched, in most kitchens this is do able , it’s not often you’ll run into a 12’ or 16’...
I‘d like to claim I thought of it, but I googled it after seeing the Rockler clamps, they looked like a good idea , but to high priced. Glad you passed it onto the tips and tricks thread.
If you have a chop saw and not a compound miter saw this would be the time to upgrade to a CMS .
I think on my older Makita 10” chop saw IF you pad out the fence with a 1 1/2” thick sub fence...
We use the Collin’s spring clamps at work , on base and mitered window trim , or other places that they come in handy.
I made my own “Bandie Clamps” , I went to HD and got the .99 cent spring...
I’d suggest screwing the block on thru the drawer bottom, so when , not if , it needs removed the block could be unscrewed rather than busting the glued on block off the drawer bottom. Couple of...
398786
I’ve used The Murphy Bed pivot hardware with excellent results.
The drawer fronts are false fronts, no drawers according to the OP’er.
3/4” + for the board , with the saw kerf you’lol be lucky to get two strips out of .77 thickness.
I’d recommend MDF for the drawer fronts and the panels on the side.
Plywood could work.
If...
We run 6 1/2” DeWalt’s 20 V, solid saw, we use it for Hardi Plank with siding. Home Depot’s got some great deals on blades for this saw as well.
For a router table the hardwood S/E is a good idea, but I’d recommend it go under the P. Lam
top.
I wrote about that in post # 3 or 4.
Old metal blinds work great to use to lay large sheets , once you get the P.Lam where you want it , I generally stick the center and then pull blinds and work toward the end.
398153
...