Been under the weather lately. Still not very chipper. However, I did get the mount posted to thingiverse and popped in here long enough to throw this post up.
The mount is available for...
Type: Posts; User: Mike Audleman; Keyword(s):
Been under the weather lately. Still not very chipper. However, I did get the mount posted to thingiverse and popped in here long enough to throw this post up.
The mount is available for...
Sigh. All too common these days Bill. I can't tell you how many simply would rather work for McD than learn something and go get a real job. One that can pay the bills for the things they don't...
There are two main form factors for SSD (there are others but there are two commonly available). Those who adapt to the SATA bus and those who operate on the M.2 bus.
Depending on your SATA bus...
This issue has nothing to do with your business of marking, cutting, engraving, etc. Its a widespread issue across virtually every sector of business I have seen (and I see a lot as a web dev). Your...
You can do similar things using a common digitizing tablet like a Wacom. If the part is too big to fit all at once on smaller tablets, you can do it in sections as long as you have common reference...
Its an open box in the US :)
Bill, thats not what I meant. I want to know what is the difference in the stock V8 and what LO distributes so I would know whether it was better to buy the controller from LO or go with the stock...
Well, the LO-R5 looks similar to the 644x. The manual is names User_Manual_RDC644XG_V1.2.pdf. And the software manual shows the software is basically rdworks v8. I haven't used v8 extensively but...
The keypad is but one aspect. $200 to replace the head (depending on where you order). For another $150, I can fix.... Lack of ethernet. Lack of v8 support (obviously no future in v6). Along...
My reasoning for replacing my old 320 is that the old 320 is USB only. RIght now I am using a USB over ethernet adaptor. PITA. Second is that a couple of my membrane keys are starting to...
If its a RDC-644x as you state and all you want to have it a remote start/stop, there is a foot switch input. Keep reading. Its a momentary contact input and its designed to have a foot switch to...
Been looking at the controllers. 6442G and 6442S are very similar. Looks like S can drive two heads. I only have 1 head. Any advantage to getting an S over a G?
Found an open box S model. Is...
Check voltage coming out of the PSU (not the HV PSU, the 24v PSU). If nothing out, check 120vac going into the PSU. If you got 120v but no output, its the PSU. If you got 24v coming out of the...
You are welcome. I will be doing the final prep and upload on the mount this weekend. Have had some other things I needed to work in this week after work.
It will be here:...
I had looked at those too. The local science shop has them. However there are initial issues with it that i recognized right away.
1. It creates small pressure points on the glass tube which could...
Which is why I am attempting to make sense of it all. Where can I find out the CORRECT mA rating?
Ok, I have a new tube installed in my china blue laser. The specs according to the ebay listing:
Specifications:
Max Power: 50W
Wavelength:10600nm
Length: 850mm
Cooling System: Water...
Of course its going to be posted for others to use. Why would I keep something like this hidden away :) I am not in this for anything but a hobby so I don't have any IP to protect. I expected to...
That piece of brass was one of my calibration reference rounds for reloading. Thats why its marked with the bullet manufacturer and the COAL. I keep a tray of reference rounds for each caliber. ...
I have hole saws. And greenlee punches too.
However the panel I wish to mount it is not sloped very much so my viewing angle on the meter would make it all but impossible to read. And mounting...
I know its not an adhesive. Its actually a chemical welder. However, talk to someone in an orange vest at HD about a chemical welder and see how far the conversation gets you :)
I will be running 120v up as well as 12v and 5v dc (the extra switches mentioned) and the lead from the tube to the meter. I don't think wood would be an appropriate material for housing 120vac. I...
Emailed them. Had already emailed Midland plastics as they are on the way home from work. I also emailed SignsNow as they aren't too far from work here (so I can pop out and buy if they got it).
...
Won't removing the cerakote expose the metal and allow rust to form on the unprotected metal?
Looking at getting some acrylic sheets from Home depot this weekend so I can fab up a meter box for my china 50.
I have never done acrylic. So I don't have a clue for a starting point. Anyone...