I use it to attach runners on jigs that ride in the miter slot. It's also Good for small parts that are difficult to clamp, but can be held in place a few minutes. Keep it the refrigerator and...
Type: Posts; User: william watts; Keyword(s):
I use it to attach runners on jigs that ride in the miter slot. It's also Good for small parts that are difficult to clamp, but can be held in place a few minutes. Keep it the refrigerator and...
I spent today at my friend's shop. He is inclined to keep both table saws. The PM looked to be the better of the two having a rip fence and a Inca miter gage. We chose to start there, checked the...
A friend has been buying used tools for what must have been a long time. He has 2 table saws, two jointers, 3 router tables, a dewalt 735 planner, and numerous pieces of fancy anodized aluminum that...
The Makita 2012nb is a slightly quieter planer, not a lot, a little, and as a bonus Makita guarantees no snipe! I bit on this fantastic puffed up advertising and bought one. In my ears the...
Cutting the rails flush will not allow the fence to lock down near the edge of the table. The "t" part of the fence will not have any surface to bear against when you lock down the fence. You would...
I've had a pace maker for 8 years. The battery was getting weak so they replaced it with a newer version, about a year ago. I did not get any specific warning from the doctor. They do warn about...
:)I'm]I haven't heard that but I can believe it. In my experience Duracell is the worst offender for leaking. I finally gave up and quit buying them.
John's correct, I spent 35 years in...
I use a super dust deputy and a 1hp harbor freight blower. The vent is directed under my garage door, I raise the garage door about 1ft to exhast into the driveway. Nothing collects or can be seen...
Thanks for the responses. Seems like the you tube video is wrong, hard to imagine. I have reserved the hold downs at w.c. and will pick them up this am.
My garage shop gets to 105 several days a...
I'm thinking of ordering the table saw guides. I would like to ask if anybody that has them has had any problems. You tube has a video that shows the O rings melting in summer heat is that...
I no expert either, but before I retired I was tasked to correct the same problem for a customer. The boss said “here’s a interference finder” seemed to be a broad band r.f. receiver with a meter. ...
Nice grain orientation in the columns and the mantel and it's big. Looks like it fits the space properly. Like it very much.
Buy the grizzly deal. Then decide on a furniture project you want to build. Then buy the hand, or power tools, as needed to make the project.
I have a table saw and a band saw. The band saw was...
I have a 14BX with the mobile base, it's used in my garage shop, so light use. This saw is a world of difference from my cast iron 14 in delta. ...
It could be Milwaukee produced a model, and gave special pricing to HD. Then made it unavailable to a Milwaukee dealer structure in some states. Their trying to avoid rebellion amoung their dealers...
I'm also very happy with the EGO blower. It uses a 56 volt battery and has plenty of power to blow our small city lot 3-4 times before needing recharging. It's quieter than gas, no need to keep oil,...
Seems you have checked all the usual suspects. It could be that the blade tracks centered on the upper wheel but to close to the edge on the lower wheel. Are the teeth on the blade pointed down?...
Here in California retailers are not required to collect sales tax, only remit it to the state. Now and then an ad appears with a big header that states " buy this Gizmo and don't pay the sales...
Well, they do ask "anything wrong with it" and I tell them.
I am feed up with with squares that aren't square, parallel clamps that aren't parallel, and tools with steel so soft they bend at the first use. Three weeks ago I purchased a Makita 2012nb planer...
I fought my jointer for years then finally purchased the Veritas 50 ipnch Aluminum straight edge. Turned out I needed to shim the outfeed table. The price at the time was about $80 , been a few...
Please register me. Thanks for the drawing
Bill
I have not posted for a longtime but have been a lurking regular. Moved to a new location, and now have a garage shop set up and started woodworking again. I hope to be posting some from time to...
I used a business that advertised handy men for hire when I installed widows on a rental house. They employ experienced people from the different trades that work on a on call basis. I used them to...
Well Tony, I have no idea why the surface burners do not trip the GFI. It seems they should trip the GFI also. Darn, that calls into question my previous explanation:( Someone may be along to...