I think it does have to do with the color and power. When I select the graphic and change the color, then change the power and speed, it works fine. When I change those settings on the default black,...
Type: Posts; User: jarrod lineberry; Keyword(s):
I think it does have to do with the color and power. When I select the graphic and change the color, then change the power and speed, it works fine. When I change those settings on the default black,...
Thanks.I'll have to check the line color when I get home. I remember fixing the problem before, but don't remember what I did. I don't think it was in the vendor settings though.
I restarted my laserworks program and when it came back on the machine will run the cut file, but it won't fire the laser. I know there is a setting somewhere that needs changed. It did it to me a...
Ray. It's a mirror not a lens. Should I still go back with an oring?
Yes. That's the one.
I am trying to remove my 20mm mirrors for an upgrade. The threaded ring is very tight. I tried cutting down a putty knife so it fit across it and into the slots, but it didn't have enough strength to...
Problem was cause by the power supply having the ground and one AC leg swapped at the factory. It burnt a tracing on my power supply. I can't believe it worked at all after that.
I checked that and couldn't find a problem. I did away with the 110v converter and it is doing better, but still not as good as it was before. It is at 38w and using 10-11mA. I wonder if it was way...
The laser has less than an hour burn time on it. Surely even it if was set too high it wouldn't go out that quick, would it? It seemed to happen all at once. It's odd to me that it dropped down but...
I pushed the test button and it was only 8mA still. Does that mean the psu is bad? Can the tube be bad? Is there anything else I can try.?
Are you talking about a wire that goes from the controller to the laser psu?
Rdlc320-a. I will give that a try, now it is set at 98%max and 6%min. It worked fine before, but something happened when it reset back to Chinese language.
Thanks I need to get one of those meters. Anybody know if you can jump the power supply to get it to fire at.100% to see if the problem is with the supply or the controller?
DC clamp meter didn't work. I used my regular meter on the ground side of the tube and it was only 8mA. Any idea where to go from here?
Could it be in the controller? The reason I am asking it because I was engraving a test picture on a piece of tile the last time it was working properly. A few seconds after the engraving started,...
I have a DC clamp meter. Do you think that might work?
I didn't see a current sitting on the menu and I didn't see an adjustment on the power supply. what should it be amd how do I check it and change it if need be?
My nearly new red sail x700 50watt laser went from 62watts at the tube a few days ago to 31watts today. I have only used it a few minutes since it was reading 62watts. It seems like it did it from...
My laser had a 120v to 240v power converter with it when I bought it. I don't know if it was sent with it or if the previous owner bought it. I read somewhere you couldn't run the laser off of...
I will do the slope test. The lens appears clean. Coating is intact and not scratched it just doesn't let light through.
Ok. The lens I have it strange. I tried to read print through it and the coating wouldn't let me see through it. I thought maybe I could shine a flashlight through it, but the light would not make it...
I used fedex thermal labels to line it up. The beam was hitting near the bottom of the first mirror but not into the frame. I adjusted closer to middle of the rest. The rest seem pretty clean, but...
I just bought a redsail x700. I thought it has a standard 55mm lens, but I don't know. My focus spot seems to be about 1/2 inch from the nose cone. 55mm is a little over 2in. I don't think my lens...
I figured surely a grounded outlet was good enough
Redsail x700 50watt rdlc320-a controller