It is a beautiful box Daniel. Well done!
Type: Posts; User: Adam Wilson; Keyword(s):
It is a beautiful box Daniel. Well done!
I would have been in trouble if too much flattening was required. I used the domino height adjustment setting to get a consistent domino hole on both sides of each board. I then used a hand plane to...
Thank you for the positive feedback. I am encouraged to keep developing my skill set.
I used a domino every 5 inches to joint the boards. The breadboard ends are a dado joint with floating pegs.
You must have kids. The bench has been perfect for seating them. The carpet is old and does indeed need to go.
I used 3 coats of Waterlox primer followed by 1 coat of Waterlox satin finish. Thank...
My first large build. I am not completely happy with the base design, I may change it after I gain more experience. Three chairs are on the build list.
300285300286300287
Nice looking piece!
My sister in law had an ugly piece of driftwood she wanted fashioned into a furniture piece. I used Zebrawood for the legs and cambia ash for the aprons. I am not positive of the type of driftwood....
This piece was more challenging than the table. I became slightly impatient while shaping the legs. I used a Charles Brock template with cherry and walnut. I am trying to slowly build my skill set...
This is a beautiful piece! I am in the early stages of building a chest. Thank you for some much needed inspiration.
Really nice work Brian!
This first link explains the dangers of not having your blade parallel or slightly skewed away from the fence.
http://www.raygirling.com/kickback.htm
This link provides information on how you...
If I properly understand your question. I think all table saws have this as a built in feature. Once the wood is cut at the leading edge there is no reason for the far end side of the blade to be in...
Each leg has three pieces joined together with a 40mm domino and glue.
The center has four dado grooves that run the full length of the table. Each leg has a tenon the same length.
Thank you to all for the encouragement. I will post more pictures soon.
I used a domino to join the feet and legs.
I am new to woodworking. I find inspiration in many of the amazing pieces posted on this forum. Thank you!
Sam Maloof inspired table from a Scott Morrison template.