I bought this from Pat Warner:
http://www.patwarner.com/round_subbase.html
Type: Posts; User: Lit Jones; Keyword(s):
I bought this from Pat Warner:
http://www.patwarner.com/round_subbase.html
I went with 1/2" AC interior plywood, and I ripped some poplar to create a batten board look -putting a strip at each stud, which also served to cover the seams.
...
Brian,
That piano bench is a cool design. Is that your's?
in order best to worst:
design - the initial sketchup version, through the many iterations to make it perfect. Waking up in the morning with a new idea and tweaking or redoing a working...
I built an 8' sled for these types of things. It's a simple design with some sand paper glued to it. Loose wedges are all I use to stabilize the board on the sled as it passes through the planer.
...
You're off to a good start. A few suggestions - which you can ignore completely:
The island looks a little chunky. And if you want stools on the back side, it needs an overhang of 16". I...
Check install:
Should have extracted zip to your plugins folder. On mine, that is c:\Program Files\Google\Google Sketchup 7\Plugins
So in you Plugins folder, do you see the cutlist.rb file and...
I store mine horizontally on support brackets, and do not store anything on top of it. It appears to be straight still, after 4 years. I will someday build a 4 foot version since I find that would...
I would not lay it perpendicular to the old floor, because you really do want the floor to be perpendicular to the floor joists. Even if you think the existing floor is dead flat, the floor tends to...
I made my own design - an 8' x 12.5" sled that has a face of 1/2" plywood, backed by 3 maple runners that have cross-ribs to add support. The cross ribs are not as thick as the runners, so the...
I have been through this and found this site helpful:
http://www.nkba.org/guidelines/kitchen_6.aspx
To sanity check, open the fridge, oven, or dishwasher all the way, stand in front of it, and...
I copied his technique and material choices almost exactly, but with a few minor tweaks:
I rabbetted the back so that the top fits into the back. Norm did the reverse, and I never understood...
I did this in my last house's living room. Instead of following the ceiling line, I created a level plane shelf slightly below the top of the wall all the around the room. Then I created a nice...
I agree with the poster above re:
http://www.garymkatz.com/recent_articles.html
I was frustrated by sketchup also for the same reasons until I watched the bookcase video on groups and components....
I put 8 of these troffer fixtures into my 18x22 shop, and it seems like the right amount. I can see everything easily, and it is not overly bright. ...