Looks like you can still buy them from Constantine's.
https://www.constantines.com/50samples.aspx
Type: Posts; User: Tim Offutt; Keyword(s):
Looks like you can still buy them from Constantine's.
https://www.constantines.com/50samples.aspx
I'll take it, PM sent.
Do yourself a favor and skip the mini-mills. While many people have them if you've ever used a Bridgeport type you probably will be disappointed. They lack the rigidity and mass to be productive.
...
I have a large Doall with the blade welder an I routinely weld both carbon and bi-metal blades. It is rated for max of 1" width but I have welded 1-1/4" for the woodmizer.
You don't have to go the turnbuckle route. You can buy right hand and left hand all thread at many places online, McMaster Carr, MSC, Grainger, Enco, etc. Also you can buy the nuts for the rod.
If...
I have a cabin that I drain in the winter. What I did was pull the submersible pump and removed the internal check on the bottom. I then added an inline check at the pressure tank which holds the...
I agree with the others, training is good. One thing you might look into is the DVD training set sold by Woodmizer if it is still available. It used to cost around $100 and it contained good info....
Jerry,
Not sure where your cabin is but looking at your location of Northern Illinois my guess is Wisconsin. If it is north of Wausau, say Minocqua, etc. there is a large weekly flea market in St....
Thank you to everyone who replied. We think we may have found a source online to cut these patterns.
Tim
Dan,
Thanks for the reply. They will not hold a tool with it. The tool is held by a hook like normal pegboard only it is steel not wood. The magnetic cut out would show what tool went there, it...
Hello,
I normally frequent the woodworking portions of the site but today I need some engraving help. We sell what are called shadow boards, the custom cut foam inserts in tool boxes where each tool...
I didn't read the complete thread so I am not sure if this was said. Make sure to document EVERYTHING with photos, video, etc to prove the pre-ship condition. I am sure you know this, just wanted to...
I burn the slabs in my boiler. I have a large 16 foot long rack that sits directly behind the mill. It is basically a "U" shaped wooden rack with uprights every 24". I pile the slabs and strips in it...
The reason it is a no-no is because the never seize acts as a thread lubricant. Any time you are torqueing a fastener the majority of the torque applied is consumed by friction, in the threads and...
I have two homes, one on the water and one not and I have three boats. Two at the lake home and one in Indiana. At the lake home we are 35 feet from the water and the view is great but I couldn't...
I think the mildew problem is possible with any of the front loaders. We used to have a Whirlpool Duet, bought it when they first came out. Whirlpool was a customer and we got a great discount, over...
I use the standard UC Coatings material and usually apply it with a six inch roller as soon as possible after felling.
I have a friend who tints it with dye, certain colors for certain woods. I'm...
My experience has been skunks will not spray unless they can fully lift their tale. So a smaller cage or live trap will help prevent the spraying. I have also CAREFULLY covered the cage with a...
I live in a rural area and have had it for several years, probably 15. When they ran it in the costs were spread over a monthly minimum bill of $120 for three years. I never worried about the...
i have done it many times. You just attach one cable clamp to the start of the water line and the other cable to the end. Turn on the welder and bring up the power. It is a short circuit and it...
There are two basic technologies in mobile phones, CDMA and GSM. This is the reason you can't use AT&T phones on Verizon's network and vice versa.
In the U.S., Sprint, Verizon and U.S. Cellular...
When I got up this morning my cart was up but several items were sold out. I missed a couple planes I really wanted. Still managed to get a few items. Too bad the checkout didn't work at 12:10.
Same thing with me. Six items in my cart by 12:08 and every time I try to check out it shows nothing. I give up, time for bed.
For what it is worth I have sold overhead cranes and jibs for nearly thirty years and have seen many things, both good and bad. Based on this experience I would not do what you are proposing. Several...
FYI, you dont have to pour concrete columns for your posts. You can buy premade concrete post bottoms with steel post brackets that are design for pole barns. I have used them several times and they...