Search:

A set of bobtail 1911 grips.

I’ve not worked them with anything but solid woods. I’m not sure I want to do it. Afraid it will mess up. Don’t want to screw it up if all he has is enough for 1 set....

Cutting, milling, sanding and drilling through epoxy impregnated woods or other materials such as stacked cloth. What can you tell me?

Challenge excepted!

:)

Only takes a few seconds to swap paper. Never thought about having multiples of Sanders. Now routers on the other hand...

Lol that’s funny.

I only hit 220 though...

I’ll go higher with finish if needed but only if needed.

Bandsaw came ups freight. Ups guy unloaded at curb and with the pallet jack we pulled it into the garage. It was on a pallet of course and actually would have slid easy.

Drill press came by...

Couldn't find that bearing in town but I got it spinning again. Looked up some causes. Probably a few reasons. Bearings, feed rate maybe, possibly the wheels, and likely over use. I've need running...

Whelp, my quarter inch Bosch blade just broke.

Looks like my lower thrust bearing is seized. Can a seized bearing cause blades to break?

I think that's simply what I'll have to do.

It works amazing for resawing. I love it. Just surprised it couldn't handle the shallow round I was trimming off.

Man I just didn't think that shallow curve was enough to break the blade but that's what I'm gonna go with. I put on a 1/4" 6tpi Bosch blade. Cuts slower but hasn't broken yet.

I also picked up a...

Well I went to Lowe's and bought a bunch a $10 blades at least I have a stock. I think perhaps I am turning it to tightly cutting the round off the tops.


Perhaps I need to swap blades whe. I...

Grizzly GO555LX

Laguna Proforce 93 1/2", 1/2" 3tpi hook, both broke not at the weld.

Both new blades. Resawing 4/4 strips in half about 4"s long then roughing out pistol grips.

Set up the...

All I want to say though its been said is that proper blades make all the difference in the world.

I put a "plywood" blade on my worm drive thinking it would just melt through the ply I was...

Ridgid 18ga brad nailer and a cheap HDX 1/2ga compressor.

The amount of work I've gotten done with those is remarkable. A true "must have" of any home owner IMHO.

More pressure and more buffing.

Just keep buffing till it's smooth. Just like car wax.

i just started using it and love it.

So it's been raining like crazy here every afternoon.

Before using paste wax last week I had oil on the tables. I had wiped them off and then used the paste wax.

Turns out what I thought was...

I actually haven't had any rust.

Just being proactive:)

It's a garage shop and 1 car still gets parked in it and the open door is part of my dust control. No fixing that. It fluctuates from 30%-100% yesterday. Right now it's 72% and will probably burn off...

Thanks for the tip on the Johnson's Paste Wax.

I picked some up and spent the last hour getting it applied.

Yeah it's AZ but the humidity was 86% this morning and currently 54%.

Only for a...

Cool, thanks for the guidance.

It is typically pretty dry here year round but for a few months each year it's pretty humid and hot, July/August.

Figure I might as well be proactive.

Question fellas.

It's wet season here in southern AZ. I have a handful of tools with larger cast iron tables. What do you guys that live in wet areas do to keep your tables/tools rust free?

I...

I put ours through the wall. We tried the sliding door insert deal but our door is too small.

Put in a dog door and puppy run. Used the scraps to build a fence around the AC unit and painted the kitchen.

I got a new Grizzly G0555LX and I am looking at getting the resaw fence.

H7587 Resaw fence complete

Looks like it comes with new rails as well. I can't find it as a stand alone fence.

I am...

My 2 cents and a first post here as well.

First off I would not recommend maxing out any type of CC. Pay it off in 2 years... yeah, not really. Why? Because life happens and now you just took away...