Search:

Great ideas folks! Thanks so much. The template for each hinge makes sense but the transfer punch idea....why didn't I think of that? 🥴

I use the small Brusso Box Stop Hinges. I always have difficulty getting the screw hole centered properly. I used to be able to eyeball it with a prick punch and that worked OK. As I am getting...

🤣🤣🤣 Indeed it is...

It's tough to crawl out of that youtube rabbit hole once you get started.......

Thought I would give those that may be interested in my results.

Make sure the sole is flat
Sharpen at a 45 degree angle & MAKE SURE it is straight.
Burnish the edge (tried without burnishing &...

I checked out the videos Rob suggested....inspired me to look further. I found this: https://www.youtube.com/watch?v=tpgnS_zgE6Y It's a Lie-Nielsen video but it kinda answered my question. You'll see...

Thank you for your responses....the 81 is different in that there is no center screw to flex the blade. I'm not after sharpening info...just how to adjust the blade beneath the sole of the scraper....

I just picked this up...in good shape appears to have a rosewood base? I know how to sharpen the blade....do it already on my card scrapers....anyway how does one set the blade up to cut? Perhaps a...

Try this
https://cdn0.grizzly.com/shopplanner/v1-4/1/shopplanner.html

Thank you !

Thank you!

Thanks to those that responded.....I appreciate your insight and it gives me something to think about. :-)

BESIDES A METAL BARREL

what have you successfully used and recommend for the SDD? I was thinking fiberboard but not sure....around 20 to 30 gallon capacity. Sources too would be helpful. Thanks

Over the years I've tried most of them. I use Forrest

Thanks....I'll check it out

Model is PCS31230....thanks for the responses

Yes. It needs to be removed. Just found out. Sorry for the double post

For those that have performed the replacement. The instructions are not clear to me that SS service sent and they are closed until 11 EST. Does the double pulley need to be removed to replace the...

Thank you for added ideas :-)
Ray

Thank you for your help :-)

Not looking for cheaper/thin plastic bags.....Rockler sells 3 for $10.......pricey IMO. Looking for a different source TIA

for Dust Right Canister Filter for Rockler 650 CFM Wall Mount Dust Collector....can get them at rockler but looking for a different option

Thanks

Beware! I just camp back from my local SS distributor.....the one I bought the fence from. They were not going to take it back. Seems you have to deal with SS AFTER the purchase if you are not happy....

Actually I was talking to the service dept. The fence will go back....and thanks for the
Very Super Cool Tools fence suggestion......looks good albeit pricey.

Thanks for the info.....odd that the SS rep I talked to diddn't tell me about the 2 different fences though. It was like there was only one fence.....I even mentioned how much I liked my SS fence...