As I have posted my Craftex CT128N has quit. Going to have to replace it. Looked at a Laguna 1836 yesterday and seems to be something like i would be looking at. 2HP 220 volt motor, 1 1/4" spindle (...
Type: Posts; User: Frank Denny; Keyword(s):
As I have posted my Craftex CT128N has quit. Going to have to replace it. Looked at a Laguna 1836 yesterday and seems to be something like i would be looking at. 2HP 220 volt motor, 1 1/4" spindle (...
put in 2 new fuses in circuit board and both blow instantly when switch turned on
My Craftex CT 128N lathe quit yesterday. The only indication of power is when you turn the lathe on, the spindle speed indicator lights up. Had the 2 breakers on the panel checked and they seem OK....
I used the N Sided Pyramid file and after a few attempts got a respectable product. One thing I found was that the wood being used has to be perfectly flat of with 16 pieces you don't get a round...
I am making a 16 stave tapered bird house. Finished product is 6 1/2" high. Top outside diameter is 7 3/8", and bottom outside diameter is 4". The bottom will be finished with a round disk maybe the...
Sent my question to Canadian Vendor
Have a tin of Hampshire sheen that has gone hard in the tin. Any suggestions on how to soften it up?
What I have done is made a few personal pens from a piece of wood from an old building that had sentimental memories for someone. One year I made 17 pens from a piece of wood from my grandfathers old...
Did anyone find my piece of 25mm round steel that I am/was going to use to have a couple of tool rests made. It is supposed to be for the posts and about 10" long.
I am from Canada and thought I might order to give them a try. Went to Sears site, price was $73.73 Can, put in Shopping cart price dropped to $66.36. Went to checkout this was my bill Tools ...
I have a new Oneway Talon that I will be using on my Craftex CT128N (I believe same spindle as a Grizzly GO698 ) and the set screws jut hit the very last thread on the spindle. I have read a forum...
Just a question? Can anyone tell me the difference between the 3 above models except the color and price? The parts list from each manual looks identical. I know they are advertised with variable...
Please keep us updated on the G0698 problems. I bought a Craftex CT128N here in Canada from Busy Bee tools and from all indications it is the same as your Grizzly but different color. Have had no...