Search:

You give me the address and then you wont have to make a 90 mile trip. I on the other hand will have a long drive in front of me.:)
How many board feet of the stuff does the guy have?

That's a cool wall. I have a slider that is insulated and for a seal I just used garage door weather stripping. It has worked great for 7 or so years now.

So is it that we as consumers don't want fuel efficient cars/trucks?
Big oil does not want us to have fuel efficient cars/trucks?
Or the environmentalist don't want us to have them?
I have heard...

Bob I would have to say this is not a DYI. You can't mix creet fast enough in a mixer to pour a floor and have it come out right. If you can get a load brought in than you could pour it. But you only...

If you even have the sliest thought about getting behind it again some day screw it. If you know that all future work will be in front of it nail it. I would probably nail it any ways. There is just...

Is'n it a sham that you can't seem to get things built to last any more.:rolleyes:
Used to be you got a washer and dryer and it was for life now your lucky to get a few years out of them. Same thing...

I use the GRK screws for just about every thing now. They are pricey but well worth it. There only short coming is that they don't pull as good as ones that don't have a counter sinking head. If you...

Call me dumb but how is this going in the scam direction? Short of giving you a bad card which you would get it approved before you start. I am just not getting it.

The only problem is when you carry the corn beef to work the next day. If you don't have the bread it will stick to your pocket.:)

I ask for 2 ought and I get (as marked on the cable) 2/0 AWG:)

It is the code and the BI all ready knows to check them when he comes back to do the CO. My bet is that is the first thing he does when he comes back is to run right over to the stairs and check the...

Forgot the other one that bites. When you find a good deal then realize it's half way cross the country.:eek:

No it does not expand. If you have a large deep gap you could put a backer in first to take up all but the last 1/4" or so. We have a Harris company around here that sells "caulking rope" to fill...

http://www.quickshipmetals.com/brass-brass-coil-sheeting.html might try these guys

In these parts the power company, building inspector, and the supply house will all tell you the same thing. Ask your electrician.I have three subs two 200 amp and one 100 amp all running off 2awg...

Mike fear not they have started doing the fruity pizza thing here now. Oh and don't forget to get your broccoli pizza.:eek:

Ok got that now the next question. Why does one electrician say that the sub panel must have it's own ground and the next say that it does not? And does it really need it's own ground and why?
Ok so...

I have the same stuff Ben has. It was put in about 10 years ago and is holding up just fine.And I have rolled a car over it on a jack with 3" wheels.:)
Got mine in the small tubes at Fasten-all.

The problem is not the mayo. It's the rye bread.:)

The there is always the other problem. Yesterday a guy put up a powermatic saw and a 14" ban saw (ban saw was not a PM) 200 for the BS and 400 for the PM and me sitting here with no extra money to...

http://www.quickshipmetals.com/brass-brass-coil-sheeting.html
I had such good luck with these guys. I called them up after I got my order to thank them for having such great service.
If you can't...

Rob why is that?

Overall score: 4.32

Hi all I just found this place and thought I would pull up a chair.
I am a builder in NH and the maker of Dragon Thorn Trunks.
For a look at some of my work http://www.dragonthorntrunks.com/