Search:

Well, thanks guys for the valuable responses. Scott, that is a good analysis between saws. Thanks for the info. Maybe it is not quite the time to invest. I already have a Delta Grand White...

Hi,
Could I get some feedback concerning table saws?
I am contemplating between the Baileigh cabinet saw and 2 Grizzly models, G0691 and the G1023RLX.
What would the differences be between them,...

Dave,
I've used waterbased contact cement before, although not under your shop conditions and have had great success. I built a cabinet with a slide-out shelf under the top and laminated it all over...

Well... $10,000? I don't want to be too greedy, so I'd ask for the new Delta Unisaw, a Powermatic 16-32 Sanding machine and a Powermatic 15" planer.
Merry Christmas to all...
PS.
That would...

OK. It's true that text alone cannot contain true sincerity. I guess though, I leaked alittle. My Appologies. I did ask those ?'s very sincerely. I've been on this forum since way back at it's...

OK, so I guess that no one knows how to answer my questions.
It's wonderful to use your own fixtures, but how does that help someone else, if you hold back from giving what is needed?
I thought...

I bought a Powermatic drill press a few months ago and have been encountering a few "projects" to get it set up. 1) the dust port - needed to research and modify an adaptor for the dust port to hook...

WOW! Some great purchases this year. Who said we're in a deep recession?
New to my current line-up of toys are:
Jet combo sander, closed base.; PM2800 drill press; Veritas low angle jack plane, set...

Just got the New PM2800 drill press. So far, works great, but I'm unable to hook up anything to the dust port. Need feedback from those of you who have this unit. I went to both Rockler & Woodcraft;...

Thanks to all for your very informative & generous responses to my ? on which combo belt/disc sander to buy.
I've decided to go with the JET JSC-96CS from Woodcraft.
It is the one that suits my low...

I'm sure everyone here & on the planet already has one of these machines & that I am the last one to get one, so.....
What advice can I receive about these machines & what makes them so expensive?...

Dan,
I just bought an Air Shield Pro. It is working out very well so far. I'm still getting used to having something on my head though, but it rests quite comfortably & is not really noisy. The...

That is a good point, Scott.
I've been told that the Systems Three epoxy is the best way to go, as it already has the waterproofing properties to withstand the washings for a lot longer time.
One...

Brian,
I have an article my friend produced, but it is too large to upload here. I'll try to send it via your e-mail.
John

Jacob,
If you go the "do over route" use a dryer in with the BLO - like Japan dryer or Naptha, or something to help with the curing process.
These frustrations are what will make us into excellent...

Hi All,
Thanks for your expert replies for my situation.
Another thought I have is - I'm currently using the Helmsmen Spar Urethane on countertops & trim. Could I purchase the pure tongue oil from...

Prashun,
I'm not leaving them unfinished. I'm using Chery wood & would like to find a waterproof type finish for the inside & outside.
Thanks for your response.:)
John

Jacob,
I'm wondering if the BLO was completely dry 1st. It does have a bleed-back factor to it, in that it seems to be dry to touch, but then bleeds back out & has to be wiped down a few times....

I'm renovating my friend's hair salon & one of the projects are to make some boxes to hold the large pump bottles that sit on the counter above the sinks. So far, I've been using the Helmsman Spar...

For me it would be the Jet 16-32 Sanding machine.:D
John

No. I'm asking who here at the Creek is in SW Florida. I have ?"s for those who are.

Any woodworkers here live in Southwest Florida?
If so, I have questions...We may be moving there.
I would like to talk to you all.
Thanks,
John

Ken,
Try using that Goo-Gone solution. It works on just about everything & seems pretty safe. I haven't tried it on clamps yet, but probably will, as I need to clean some of mine. I heard Norm say...

Thanks for the replies,everyone.
Yes Matt, it is the Grizzly model you mentioned;sorry I was in a rush when I posted. Steve, I'm thinking along the same lines as not using the belt very often; so...

What type of belt/disc sanders do you all use, & why?
I'm looking to buy, but am on a somewhat limited budget. I was looking at the Grizzly 1040zx. What do you think of this machine?
Also looking...