Thanks Jim. The sanding sealer I used is Zinsser Bulls Eye Seal Coat Universal Sanding Sealer 100% wax free. The Minwax water based polyacrylic is the finish I was referring to that I wanted to...
Type: Posts; User: douglas hyde; Keyword(s):
Thanks Jim. The sanding sealer I used is Zinsser Bulls Eye Seal Coat Universal Sanding Sealer 100% wax free. The Minwax water based polyacrylic is the finish I was referring to that I wanted to...
put a ball valve on it
Thanks guys for all the help. I've got sanding sealer on the table now and I'm not having any problems with it. Do you think water based poly on top of the sanding sealer would work? I'm needing...
My problem is not exactly bubbles, it looks more like I've put some sort of finish stripper on it. Plus, I'm using brushing lacquer rather than the spray.
That's a good question. I am unsure of the original finish and I did not strip the table down to bare wood so I could preserve the color. I did lightly sand the piece and repaired a few spots which...
I have a dining room table that has the Deft brushing lacquer on it and I've gotten blisters and hot spots in it. Some are showing up on the second coat where they didn't show up on the first coat. ...
no no you can not you can not go over 1/1/2 hp on 110v
any one do this ?
my favorite wood is MESQUITE then CHERRY .
I need to make a 12in by 1.75in wood steering wheel for a Bugatti kit car any one do any thing like this just the outside ring the hub is screwed on with four wood screws?
It was a waste of money .I have seen it go dowm hill the last few years I had a pocket full of money and did not spend 1/10 of what i had I spent $83. I was there 2 hours and saw every thing two...
I cut up two car frames with one.
You will find it wet and Curly Woods is closing for good sat june 30 at 2 pm I got the email from them.
you have to log in too
I too would ask David j Marks he is good djmarks.com
need to update me 2007 contributor
ok I will get some then too
David J Marks will be in texas in Noverber at the woodcraft stores cant wait I will be at the FT Worth one this Sunday for his class should be good.
what about a tool repair place like B&D they have lots of brushes if you have the part # they should be able to help no I dont work there.
Mark I got some blood wood from woodcraft I thank Curly Wood has some too I hope this will help.Doug
what is the difference between white and yellow glue is it just the color or the bonding power.
Jim can I come over that sounds like fun watching the sprinkler DougHyde
it was 107 in ft worth tx 7-18-06 to hot
it was 104 in ft worth tx
it was 104 in ft worth tx