Search:

I can fit 4 x 8 sheet goods (on an angle) into my Honda Element with the rear seats folded up (or removed). Unfortunately Honda stopped making the element in 2011.

Lakeshore Hardwoods is in Victor (see link in Jerry's reply above). Pittsford lumber is on the south east side of Rochester and has a great selection but is a little pricey...

Hi Julie, Another thing to consider is the strength of the companion way doors. In my opinion the main reason for the boards/doors is to keep the sea out of the cabin. Waves coming over the side...

Great looking bench. My bench also has the Adjust-a-bench legs and I love it! I change the height all the time to match what I'm working on and can work alot longer due to the reduced stress on my...

Count me in please.

Count me in please.

Please count me in.

Thanks.

Count me in.

Thanks.

Please count me in.

Thanks.

Please include me.


Thanks.

Count me in too!

Please add me.

Thanks

Count me in

We have an indoor cat and we use www.softpaws.com/


a little bit of pain to put on and you have to replace them as cats shed their claws but they work.

205461Here is my main bench from a section of bowling alley. It is southern yellow pine. I sanded off many coats of varnish/polyurathane, took it apart and removed the nails (they were easy to...

Get yourself some of that drawer insert or carpet pad at the borg and put small pieces of it under the legs (looks like the router non skid pads but much cheaper). My woodworkers club uses it under...

Tony, I used to be able to only work at the bench for about 1 hour and had to stop due to back pain (lack of exercise doesn't help either). With the adjustable height I can work for hours and adjust...

Here is the bench I built. The top is yellow pine (from an old bowling alley)surrounded by maple. The Noden Adjust a Bench base is awsome, and really helps lessen the back pain when spending long...

count me in please

Please count me in.

Brad, this post is not related but I will go over to woodweb and check it out.

James, thanks for the info on the wood type.

Jamie, thanks for the info. The trim pieces that go around the...

Not sure if this is the right place to post this but I will start here. The attached picture is a dashboard for a Jaguar XK120 (I believe that's the model) that has been restored by a professional. A...

Glenn, congrats on the new jointer. I have one with a byrd head and after a few adjustments/modifications its great. As far as the dust collection problem, I just put a piece of 1/4 inch plywood on...

Brent, I did buy the Byrd head from Grizzly. They sent me the wrong one and took weeks to get the correct one. I didn't notice any loss of fence movement or table movement but, I only used the...

I have the 490 with a byrd head and love it, I also have a byrd head ina 15" planer. I installed the byrd head myself , it was not that difficult. If you do go with the byrd head mak sure you order...