Search:

O.K., thanks!

Bill, thanks. Couldn't find it though. Did you have a part #?

HiI
I have a Performax 22-44. I have broken teeth on a miter gear. It's part #20-1101.
I looked on ereplacementparts, and it's discontinued, not available, but that's for a Jet machine, which looks...

If you guessed filter...ding ding ding!!!
Replaced with a new one and all better.
Thanks, Creekers!

Thanks, Ken.
It regains pressure without the motor running, and immediately.
Could it be a bad filter or regulator?
Weird symptoms...

Help!
I have compressor issues.
My psi drops to 0 as soon as a tool is triggered.
It's a big 80 gal Saylor Beall. There's a filter and a regulator in line right out of the tank.

No CNC. Bandsaw and Shaper.

Platters! 20"dia. x 3" thick463609

I did a series of these I call Black Orchid. Mixed reviews on these, people love 'em or hate 'em! Hot Pink SpectraPly and Wenge. 20" dia. X 3" thick.463604463605

Hot Pink Spectra Ply and Wenge. 20" dia.

Bondo works good for this sort of thing, too.

Hey - I have a customer who wants their logo on a branding iron. I see several companies online who do it.
Do you have any recommendations?
Thanks in advance!!

I have a Byrd shaper head, which I love! But periodically I'll get a step that develops in the edge. Sometimes I can get it to even out by rotating the cutters, sometimes not. I make sure I clean the...

My 2436, runs, but after I stop it, it won't restart. I can get it to start if I turn the power off and wait a spell. It's worse with larger and heavier blanks for some reason. Help!! Thanks so much...

My 735 is really hard to raise and lower.
Is this a common issue? What can I do to keep it raising smoothly? Thanks in advance!

I used to have a source for synthetic turquoise slabs, but I can't remember where I got it. Anybody have any good sources?
Thanks!

Wonder if something like this would work:
https://www.amazon.com/Kats-1160-300-Watt-Handi-Heat-Magnetic/dp/B000I8YOR4/ref=sr_1_1?ie=UTF8&qid=1535740883&sr=8-1&keywords=magnetic+block+heater

Thanks, guys. It's a big Saylor Beall two stage 5hp cast iron pump. Not sure if it's splash or pressure lubed. Here's the manual..

...

So , my new shop has half the space heated and half unheated. I need to locate my stationary compressor in the unheated area. Short of building a "shed" for it, I'm looking for ideas to heat the...

I need a source for different diameter drums for my Clayton spindle sander. 3/4"i.d. X 9" long. Thanks as always...

Probably bearing failure, can these be replaced? Looks like a spanner wrench would have to unscrew it...

My Delta DP-400 drill press has a broken depth stop control. I have never liked the system, and now I really don't! Has anyone out there repaired this problem?
Thanks as always....

Help! Torx Screwdriver Tip Broke Off In Cutterhead Insert Screw.
Tried briefly to drill it to use an easy-out, but the tip must be hardened....
Anybody?

http://www.neatorama.com/2016/05/04/Check-out-This-Amazing-Woodworkers-Tool-Chest/

Hey all-
I'm looking at the Senco FN65DA Nailer.. anybody have experience with this one, or which one do you have and like (or hate!)? Thanks in advance, as always, y'all are the BEST!!;)