Appreciate the suggestion, I used double stick tape. I attached double stick tape to two pieces of baltic birch close to same thickness, I sandwiched the pieces (front and back) to be sanded in...
Type: Posts; User: Steven Law; Keyword(s):
Appreciate the suggestion, I used double stick tape. I attached double stick tape to two pieces of baltic birch close to same thickness, I sandwiched the pieces (front and back) to be sanded in...
Question is what is the best way to attach small pieces of wood to a carrier board to send thru my drum sander The pieces are approximately 1-1/2 in length. Normally I would scrap the wood but I want...
When I bought the dust collector, the filters were packed with shavings because the previous owner had not emptied his catch can apparently for a long time. Even with all the time I spent blowing the...
Was on couple weeks ago asking about how to install the filters. just wanted to say thanks to everyone who made suggestions. It is now up and running. What a relief to not have to run and turn on the...
Thank you for the picture. Believe I will follow suit especially for the base. Good thinking for a clean out. I decided to take the clean out lid off the stand of the stack and found the stack was...
Don't have the dust collector hanging yet but have made the wiring connections, which means I installed the plug and receptacle that had been removed and tried out the remote. Think it was wired...
Talked to the guy I bought the collector from and he said it had been eight years since he took it apart. But he thinks that what has been suggested here is the way it works. I appreciate all the...
369861
This is a picture of what I am working with. As there is no mounting holes I am puzzled. The motor says is a 3hp pulling 18 amps with 220 volt.Thought maybe there would be a piece of ducting...
Hello all, I purchased a used Tempest III dust collection with a Long Ranger remote and numerous fitting and clear tubing for 275.00. Pulled the manual up last night and am confused about how the...