If you glue 4 triangular pieces together you should get the look you want. I don't think the corners would be prone to dings with the design you are planning than if you used solid wood. The...
Type: Posts; User: Lee Schierer; Keyword(s):
If you glue 4 triangular pieces together you should get the look you want. I don't think the corners would be prone to dings with the design you are planning than if you used solid wood. The...
I would guess based on your location that the saw spent considerable time in a shipping container which was probably pretty hot for much of the trip.
Your problem is most likely that the drive...
I would de-energize the circuit. Then check each and every device known to be on that circuit to see if any are still energized. If so de-energize that circuit as well. Then starting at the GFCI...
I noticed that the link you posted isn't quite formatted the way that I use to access the Creek. Try this link instead, https://sawmillcreek.org//forum.php
Obviously something has changed as he is experiencing shrinkage problems. The wood is moving in some direction. Maybe it is just relieving stress due to machining that has been done to make the...
Kiln dried wood begins to acclimate to the surrounding environment the minute it leaves the kiln. Unless the moisture level of the environment matches the kiln, the moisture in the wood will change. ...
I believe the above statement is pure fiction.
It would help to know the type of device you are using as well as the operating system and browser. I use four different devices and I have not had the proble you have described.
As a first...
I've had a similar one in my shop for years. It also works to chamfer dowels. Mine doest see much use because I switched to .5 mm mechanical pencils.
Very nice. I've never worked with that wood. Just for curiosity how much does it weigh?
I had the same problem in one of my early cabinet builds. It was frustrating as you well know. Your options are pretty much as Kevin described above. Take this as a lesson learned. Check every...
I would never make a drawer that wide with a 3/16" front panel, let alone one that is 40" wide. I made a lateral file with two drawers that were 36 inches wide, but like all my other drawers the...
Not all band saws have the same capabilities. Knowing the brand and model of the saw you intend to use would be helpful here.
I would use this method. Use an old scraper for the metal and shape the profile with files to fit exactly on the existing molding. Once you have your metal cut and shaped make a handle similar to...
You should be able to do it on line yourself or go to a notary, they ch a rge much less. You do have to pay the tax, even if you are out of state.
It's so they have something to play with while waiting for the tow trunk after they get stuck.
I've loaned tools to people I know and borrowed tools as well. I always return the tool in as good or better condition that it was when I received it. If I purchased any blades, bits or accessories...
This what I would do. Make sure the block goes full length or you will likely make a home for spiders behind your camera which then they may give you false activations of your camera.
We traveled with my son and his two children to northern Vermont for the eclipse on Monday morning. We had some light strato-cirrus clouds move in, but they did not hamper the viewing. Here is one...
The things you listed are among the many factors that mean that truly safe self driving cars will be a long way off. There far too many variables encountered by drivers of vehicles to be handled by...
Either method should work. MDF will soak up a lot of glue so be generous. As Rob said you can use a brad gun or finish nails.
Pocket hole screws will pull the face frame to the MDF, so no...
The two in the first photo to the left with the finger holes in the handle resemble the Disston saws I inherited from my Grandfather. You might want to examine them closely.
If your cutters look like these, they are actually molding cutters for use on a table saw or Radial Arm Saw.
518080518081
I wouldn't recommend using them on a 3 Hp shaper due to the speed. I have...
I would drill pilot holes and counter sinks on the end pieces and use SPAX # 8 x 1-1/2" screws. Probably at least three per joint. Use the same screws to hold the "boxes" to the base.
SMC can accept cash, money orders or checks.....