5 months in and the power is still up with about 4-5h / day running time on weekdays. I'd suggest going with a trotec. I've got my on one myself but it might be too expensive and might have to go...
Type: Posts; User: Henri Sallinen; Keyword(s):
5 months in and the power is still up with about 4-5h / day running time on weekdays. I'd suggest going with a trotec. I've got my on one myself but it might be too expensive and might have to go...
Great to hear everything went well!
Had the same thing with the new tube: So much POWEEEEER. Had to recheck all my settings. It may be that they overpower the tubes and over time it might drop to...
Glad to be of some help :)
No idea what was the problem and I'm sure Epilog isn't that keen on letting us know if it's a faulty tube. Just glad that the new tube they sent was fine and everythings...
We had a somewhat similar problem with our last tube for our Epilog Helix 24. We had to wrestle with Epilog for some time to get it replaced but in the end they did. It was more like the letter Q...
I know this is a OLD thread, but I'd like to say THANK YOU to David Rust! This really worked charms to our cut quality!
I can't believe that this worked! 1000x Thank you!
It's undestandable if you are a hobbyist, but as a company, you just have to price things right. No material is expensive if you can yeld the right ammount of money out off it. We use plywood that's...
Our carriage/mirror was getting hot because the mirror had gone bad over the three year course it was used. Installed a new mirror and we got more power and no warming of carriage/mirrors. Since it's...
Sorry for bumping an old thread, but I'm concidering buying a Bodor-laser from a reseller in Europe and would be interested in hearing how this all went down!
Doug: Could you inform us of how the...
We use TBH extractor (http://www.tbh.eu/en/products.html) which I think is similar to BOFA. We have modified it to use the original carbon filter in combination with some filters used by the...
Construct a box with exhaust holes on top and bottom of it, fill it with activated charcoal and add it to your assembly.. Or get your hands on a BOFA-filter system or similar.. The biggest problem...
They don't get rid of the laser smells. Not nearly enough carbon on them. They do contain quite a lot of activated carbon, but the layer is really thin, like 5cm (~2") when it should be around 8"...
Unfortunately this isn't the first time seeing a Fusion acting up. I'd call the rep straight away, since there have been issues with a "lot" of Fusions. Some seem to work like a charm, but others are...
We ordered some aluminium egg crate core cut to the right size from SLPUK.com Not quite the same as honeycomb, but works nicely. In my understanding, atleast the newer Epilog lasers come with a 1/2...
Thank you for a very informative post! We are currently looking into chinese built lasers, mainly G Weike, so this will come in handy!
A tip for the filters: Have a own filter setup for every material you use. We've found out our filters last so much longer when you don't mix different materials with each other. Some gasses are more...
TBH is a good product. They make quite large extraction machines for lasers. Similar to BOFA I think
I've heard and read quite a few times that the Fusion has very many problems. Sadly in many of those cases the "They didn't even act like it was an issue worth investigation and blew me off with some...
I've seen Corian/Delrin/POM used in these kind of leatherstamps.
True. You can only hope in a situation like this the other half gives you a change, like happened with the little girl you mentioned..
You would think that, but burning wood is rarely done with business in mind unless you are talking about energy companies, which do have some sort of regulations. You'll have to do some digging to...
Remember that when you extract outside, you always suck the air out of your working space. You'll have to allow air to flow into the space as much as it flows out. When you use the extractor, you are...
If you play with the settings, the smudging will be minimal. Just a simple cleaning with paper/cloth will suffice and it will take the excess black off without leaving any marks. Usually the smudging...
Thank you very much Vic for the information!
Could some one measure the cell size of the vector cutting grid of a Epilog Fusion laser? If I understand correctly, it isn't a honeycomb anymore, but a square shaped hole.
I'd be interested in...
Nice! This helps A LOT :) Thank you!