I bought a Freud Fusion last fall to use while my other blades were out for sharpening. It is still on the saw and the rips can go right to glue up. Crosscuts are pretty clean too even in plywood...
Type: Posts; User: gary rogers; Keyword(s):
I bought a Freud Fusion last fall to use while my other blades were out for sharpening. It is still on the saw and the rips can go right to glue up. Crosscuts are pretty clean too even in plywood...
Might want to add a couple of those rubber belts to your order. Replace it while you have the pad off.
Amazon has that saw for $499.00 with the Jet rebate.
If the exhaust fan is actually running for a couple minutes that seems too long. I would disassemble the exhaust section and make sure there are no obstructions in it. The symptoms sound just like an...
I have had a lot of logs milled with a Woodmizer and they will take very little planing to clean up. If you are looking at needing 3/4 I would cut them at no more than an inch. I think you would get...
Green grass & flowers? You have been hanging on to those pictures for a while. Nice job!
Nice machine, I was thinking of getting one once the budget recovers from the holidays. Watch out for that foot pedal for the mobile base. It will crunch the top of your foot if you don`t stay out of...
Check the dust chute for clogged areas from running without the DC. It may not be pulling air across the whole cutterhead if there are plugged spots on the ends.
They have it and they ship.
http://www.bellforestproducts.com/index.html
My wife calls the Lee Valley catalog "tool porn" .
I actually bought two of the PC profile sanders. The first one didn`t last thru the job and I couldn`t get back to the store where I got it to get it replaced. It was a vast upgrade from the Ryobi...
So you don`t think the beer can sized motor on my Sears shop vac is really 5 horsepower? I feel ripped off.
Beautiful job on the jointer,but whats that boat in your driveway? something you are building or restoring an old one?
Almost 5000 views, I think their jerking around of a formerly good customer will lose them 100 times the cost of that jointer in lost sales to people that read this board. I know alot of people...
I just replaced the pads on mine, I have two of them. The best price I found is at Tool Parts Direct.com. You might want to order the rubber belt and change that too while you have it apart.
I always check out the "bargain bin at Menards for deals on the chipped plywood and stuff like that. Last trip they had two sheets of laun that had warped their way into a tube shape. I bet they were...
Beautiful job! I never used Poplar for any thing yet but I will look at some in the future. Is that your first dovetails? They look great.
I have two bandsaws, a 14 and an 18 inch. The 18 I leave set up with a 1 inch blade and do most of my ripping with that. I intended to sell the smaller one when I bought the 18 but it is a pain...
With the crazy weather we have here the wood will move more than 0.007 from one day to the next!