Search:

My wife has given me the greenlight to build new kitchen cabinets to replace our 30 year old, worn out golden oak ones. I'm planning to build with 1 1/2" face frames and use 1 1/4" overlay euro cup...

I think I'd like to go that route eventually, but some of the projects I have in mind would really benefit from the smaller diameter of a router bit.

Hi everyone! I would like to use a spiral flush trim bit with a 2" cutting length for template routing. Can use this in a shaper equipped with a router collet running at 10k rpm? I know routers...

Can you shim the existing bed? How about making an auxiliary bed out of melamine or something similar and shimming that a bit to match the cutterhead?

It was new last fall....but I haven't had much of a chance to really use it until the last few weeks. I'll take a look at the arbor and the alignment and see if that helps.

Thanks everyone for the...

I picked up a Woodpeckers Saw Gauge to measure the run out and alignment.

It's the 40 tooth version. Never had issues ripping with the thin kerf version on my old Ridgid saw.

I'm having a few issues with my SawStop 3HP PCS and would appreciate any help you can offer. The blade seems parallel to the right miter slot within a few thousandths (maybe .003 +/-) and the fence...

The "T" part of my fence (don't know the right term!) is higher than the table by maybe 1/16" in front. I've seen a number of threads about fence alignment but I can't seem to find a fix for this....

Thank you Dan!! I now have a 2HP Grizzly DC with canister filter and remote on the way!!

Thanks everyone. The chain adjustment seems straightforward in principle but it's a real pain in the butt! I messed around with it for an hour or so and didn't have much luck. I'll see what Grizzly...

Thanks!! That might be the route I have to take. I can't for the life of me figure this out!

Hi everyone! I just picked up a used Grizzly G0453 planer with a spiral head. I was excited to put this through its paces, but now it appears that boards are being tapered about 1/16 or more across...

Hi everyone! I have a new (to me) Delta DJ20 I brought home a few weeks ago. The outfeed table adjustment handle was loose and ended up falling out. I heard a clunk under the table too....I assume...

Hey folks. I have a Delta 18" open ended drum sander and I've run into some trouble lately. When I turn the wheel to adjust the height of the bed relative to the drum, I often get a grinding noise...

That looks beautiful! I bet those woods just pop in person!:cool:

If you were a master plumber, would you work at a borg for $12/hour? Probably not right? And what if they paid their plumbing associates for example as if they were licensed plumbers expecting the...

Thanks for the kind words folks! I have plexiglass in the door over the cable box, but the back behind there is open so there should be ventilation and it a few inches out from the wall. Also, it was...

Hey folks. I upgraded to a flatscreen and decided it was time to retire my old, mostly particleboard TV stand! I designed this to slide into a recessed spot in my apartment so it almost looked...

I think those cabinets are BEAUTIFUL! And one heck of an upgrade by the looks of the uppers :D I'm looking forward to seeing pics when it's finished.

It was seeping out of the bare wood on all my early tests. :confused:

I was just throwing out the second option if sealing the wood might prevent the seeping.

Hey folks. I searched though the forum and couldn't quite find an answer for this. I'm trying to get a color I'm happy with on a red oak TV stand so I've been experimenting with Transtint dye diluted...

Good to hear! I have the same saw and I haven't been 100% happy with the cuts. I'll check out that blade.

I wish! LOML decided we needed a new mattress first though. She doesn't seem to understand why we need a bigger TV! :D

Thanks folks!