John - FWWM Issue #188 has a review of premade workbenches which included an H&H. They described it as " smallest, lightest, and cheapest of the benches we looked at . . . [it] could have been...
Type: Posts; User: Ed Rosen; Keyword(s):
John - FWWM Issue #188 has a review of premade workbenches which included an H&H. They described it as " smallest, lightest, and cheapest of the benches we looked at . . . [it] could have been...
just a clarification for future threader searchers - dricore is a little under $6 a 2x2 tile, not $5 sq ft -- more like $1.50 sq ft - the barricade is a bit more (+0.25 sq ft?) but offers more...
George - good plan - I looked at two similar options that were a little easier to install - one called dricore and the other ovrx barricade - both come in T&G roughly 2' x 2' OSB panels; I believe...
Glad to hear it Gary - Good luck and enjoy that saw!
I looked at and almost bought dricore - then found Ovrx Barricade. OvrX tiles are 2' x '2 tongue and groove tiles like Dricore but are made from 5/8 inch OSB and 1/2 inch high density polystyrene...
I was going to say it looks like pine or possibly fir - is it pretty soft if you dig your nail into it?
Gary - I also came into a second hand 5hp 3 ph. Sawstop. IIRC, Sawstop does offer a single phase 5hp motor option (you would also need to replace the magnetic switch control) that would enable you...
Paul - Try Willard Brothers in Trenton NJ - not cheap, but last I was there they had 8/4, 10/4, 12/4 and 16/4 0 in 7+ ft lengths and widths from 5-8 inches - you can also find their number and...
if you have an air compressor, another option that works very well is a hand held pneumatic (air powered) nibbler or shear - they are not terrribly expensive (in the range that will readily cut 18ga...
Jason - Thanks, but IPE; Mahogany? a match for a tropical hardwood the color of maple/white oak, with almost no figure . . . . . . ? :rolleyes:
Thanks Jason, but neither ash nor poplar is sufficiently rot resistant for this type of exterior application, and neither is a good visual match - the answer to this is (unfortunately for the wallet)...
I need a recommendation for wood to replace the broken splines/ribs on a 'market' umbrella.
The wood used in this umbrella has a v. light even color - it is not, but for purposes of comparison,...
I need a recommendation for wood to replace the broken splines/ribs on a 'market' umbrella.
The wood used in this umbrella has a v. light even color - it is not, but for purposes of comparison,...
Is anyone aware of a source of flex hose (4"-6" diameter) for dust collection that has coiled wire (creating spiral ribbing) on the exterior wall, but a smooth (and not ribbed) internal wall? Thanks...
Thanks for the advice Chip
The RPC does have balancing capacitors - I am a bit concerned that adding the additional idler or replacing the 3 hp idler with a 5hp idler will put the legs out of balance -- can you recommend a...
I have a 3HP Rotary Phase Converter and a 3 phase circuit running around the shop that is powered by the RPC. I now need to generate 5HP for a (new to me) used 5HP 3 Ph sawstop cabinet saw.
I...
subfloor as flooring
You may want to consider these
http://www.ovrx.com/basement-flooring.html
or
http://www.dricore.com/en/eIndex.aspx
v. easy to install - don't need to lay anything else on top - very easy...