Search:

Groovy, thanks

We need to upgrade our Corel and wanted to make sure there were no issues with X6 and the Universal Laser Systems.

Best regards,
David

We have a Mirror that a client wants a piece of black marble mounted onto.

The black marble has an unfinished back (side that will face the mirror).
What would be a good adheasive to use to hold...

Greetings,
It been a while since we posted here (but this is still the ultimate source for engraving knowledge).
We need to update the computer we use to run our Universal PLS.
Are there any...

Larry,
We are using some IPI material right now and it works well.
My client is interested in not ablating the lamination (yes I know).

Thanks,
David

Martin,
I have also thought about using a black vinyl sheet adheared to a base material then cut (outside would be cut all the way through, inside would just score the vinyl, to allow it to be...

Mike,
That sounds like a very interesting idea.

Is there a certain type of paper we would need to buy?
I am assuming we would run the heat transfer portion first then cut out the shape?
...

Mike,
Thanks for your reply.

I am looking for a material that will turn black from the beam like thermo-paper/labels.

The client doesn't like the engraving but likes the custom cutouts we...

Does anyone know if such a product exists?

I have a client that wants to know if there is a product (white in color) available in cardstock form (standard 8.5" x 11" or similar will work).

It...

We used the Mr. Clean Eraser too, It worked great!

Thanks guys (and gals)..

David

Mike,
Thanks for the part number.

Do you happen to have the part number for the bearings?
I thought I seen where there were some over sized bearings that we a recommended retrofit (but it may...

Richard,
I have disconnected the Head from the belt and the noise is present.
The bearings were replaced not too long ago.
There isnt any visible pitting or scoring on the rail that I can see.
...

When we run our PLS at high speed we can hear a light chatter.
There is also a pattern created on certain anodized aluminum that is there regardless of the speed we run the head.

We have...

We are cutting some custom objects out of IPI laserable White Base with a thin Black layer.
When we Lase it, the black material is Ablated as it should be, revealing the white base.

The problem...

Darrell from Universal Laser contacted me regarding the issue.
He said their Engineers thought the offending pplate could have been out of focus, meaning it was a different hieght.

Of course I...

Mike,
It is black marble, first 2 parts were fine, the 3rd had this symptom.

David

Steve,
Is there a DL link for the drivers?

I'll check and post back here as to the driver version.

The odd thing is we havent had any problems at all with the current driver before this..
...

My laser just started flaking out on the 3rd part (of 3).

The text is a tiff from the client, but now regular font does it too. (top image is the bad one, bottom is the bad)

Anyone else run...

Any idea how to contact the suppliers?

P.O.C. (piece of cake)
I have a Universal PLS 4.60

It will not be hard at all...
Right through the front door..

David

Hey all, long time no post...

I have a client/freind that wants a custom engraved marble block like this rendering I made.

Does anyone know where to get one like this?
The block needs to be...

Anyone have a source for black anodized aluminum strips?

1.5" x 12" x 1/8" and 1.5" x 24" x 1/8".

Thanks,
David

Hey again,
From what I can read here, we can cut thin magnet sheets with our lasers.

1. How thick can we cut (we have a 60 watt laser)?
2. Are there manuafacturers to stay away from?
3. Any...

We received our copy of 1-touch and I am very pleased with the results.

The speed of processing and ease of use are quite good (and I'm a tough judge).
David