Search:

Good one:)

The answer is no unless you ask.

I am using a router sled to remove and flatten wood from board too wide for my 8'' jointer. This removes copious amounts of wood. The accessory for sucking up the sawdust is specifically for my Bosch...

The attachment designed for the Bosch router I am using is not effective in spoil board routing period. I will give it a go next time I use it for another application.

I've been doing it for 40 years.

Those would not work in my application. I'm using a spoil board bit. I'm setting up a router sled. I am using a Bosch plunge router and the one designed for it is worthless. I've resigned myself to...

I use respiratory protection.

The dust is from routing. There is no effective dust collection for hand held routing. I tried one designed for the router and there was no real difference than not using the device without it.

What is an effective product to stop/reduce sawdust from building up on ones eye glasses? I have tries a couple of products in the past but they weren't worth the money.

Than you.

A professional is anyone from out of town with a video presentation. ;)

Our rates here in FL jumped up to an unbelievable high. Our agent found an obscure provider and the rate is now only 1.5 times what was available for the big companies.

Thank you Fellows. I shall get out the brush and broom.

I have been testing a 1 1/4'' inch surfacing bit coupled with the dust collector for this router. I'm planning to make and end grain cuttin board.
The dust collector is as worthless as tits on a tom...

I am going to spend the weekend shopping for tools and gizmos for things I already have or think I need. I will then stow them away nevermore to be seen let alone recall buying them.

Yes. As noted on the package.

CNC Spoilboard Surfacing Carbide Tipped 4 Wing 1/2 inch shank 2 inch cut diameter straight cut. Never used, still has plastic coating.
I have no pic if the actual bit but will attach one from...

The Woodcraft store in Jacksonville, FL is closing. The owner said he is closing his other store in Massachusetts.
He has had the one in Jax. for over twenty years.
There is a newly opened Rockler...

I have had Delta 14'' band saw problems. I found Renovo parts and they have turned out to be a winner.
The person whom I talked to said the years ago when Delta started to get out of the picture the...

John;
My wife and I got it done. Your instruction to pinch the wedges together was the key to the whole deal.
Thank you,
Jerry

Thank you for the help. I shall give it a go tomorrow.

516133
I had to take the lower blade guide off as it was frozen up. I needed to tap the trunnion plate out to remove it (bottom of pic). This item goes into the above part. Two spring wedges fit...

A family member is in the process of making a cherry magnetic kitchen knife holder. She wants the magnet to be hidden behind the wood. The wood would be about 1/4'' to 1/2'' thick.
The magnet could...

Good one:)

Q© 201 Series - Qsaw© Hard Back Carbon
Anyone familiar with these?

I'm getting Handle on it. The die cast piece is sticky. I'll go to Ace later today and get some Blue thread locker and start on the lower adjustment at a later date.
I seems odd that I worked, as...