Search:

Type: Posts; User: stan kern; Keyword(s):

Page 1 of 17 1 2 3 4

Search: Search took 0.08 seconds.

  1. Replies
    0
    Views
    7

    2nd run at a raised panel

    this was a better run,took 27 min and it turned out well

    http://youtu.be/SQl37ihV2kY
  2. Replies
    2
    Views
    94

    I could not find a piece of mdf so I used plywood...

    I could not find a piece of mdf so I used plywood and only 2 spots popped out and it was very smooth as I used a 8% stepover.
    Mdf when sprayed or painted will be fine and its not done as rails and...
  3. Replies
    2
    Views
    94

    ist run at a raised panel

    the project was to try and program a raised panel and make it look like a frame with a shaped panel
    not a routed pathe
    Its getting there ,just a bit too slow ,next one should be better
    ...
  4. Thread: drawings

    by stan kern
    Replies
    6
    Views
    698

    Have a look at this site ,makes drawing easy...

    Have a look at this site ,makes drawing easy
    http://www.logicgroup.com/

    this shows a trace http://youtu.be/YUCzJ9YBZpw blue herron
  5. Replies
    3
    Views
    848

    blue herron trace

    http://youtu.be/YUCzJ9YBZpw blue herron
  6. Replies
    3
    Views
    848

    I like your diagrams

    I like your diagrams
  7. Replies
    0
    Views
    641

    arch top guitar full size plans to dxf

    Using the logic trace cnc dxf program I digitized an arch top guitar top and bottom
    easily

    http://youtu.be/LMXKcLl0i-k
  8. creating the file for a fitted dreadnaught D28 guitar case

    http://youtu.be/jH6awTnMvko

    dreadnaught D28 fitted guitar case
    This was easily traced even though it did not sit flat on the table
    I did it in 2 parts and fitted it together and increased the...
  9. Replies
    3
    Views
    848

    drawing software different selections

    http://youtu.be/rIk0ToiDfGs

    using logic trace cnc dxf software using trace and curve fir thro points
  10. Replies
    0
    Views
    607

    2013 logic trace cnc dxf program

    I was asked by a few to produce some demos showing the table setup and some selections on the software
    for tracing

    http://youtu.be/IddM_NwSkm8 setting up tablet works and the cnc draw program
    ...
  11. Replies
    3
    Views
    633

    I guess there could be worse things ,I always...

    I guess there could be worse things ,I always wanted something flexible like this for display and this is
  12. Replies
    3
    Views
    633

    cutting and assembling body parts

    Found this pdf file on the human body ,converted it to a *.dxf file ,sized it and cut it on the co2 laser
    took about 8 min for the cutting and a bit more for assembly ang getting the right brass...
  13. Replies
    2
    Views
    759

    thanks a lot

    thanks a lot
  14. Replies
    2
    Views
    759

    sea turtle display part3 final

    Sea turtles swimming -part 3 completion.
    It took 5 hrs cnc time for the *.stl files on the turtles,then it was 9 hrs shop time for the base prep
    driftwood cutting ,sanding ,laquering and final...
  15. Replies
    1
    Views
    704

    sea turtles swimming part2

    After doing the sea turtle in basswood ,i then started the laminating of black walnut for the final 3 turtles.
    The thickness had to be right on to match up with the dimensions i used to create the...
  16. Replies
    2
    Views
    721

    thanks I appreciate the good comment

    thanks I appreciate the good comment
  17. Replies
    2
    Views
    721

    sea turtles swimming

    Came across these turtles swimming and i liked the look ,so i have started to put things together and i wanted a run on how the turtle would look
    before laminating black walnut
    Basswood is great...
  18. Replies
    4
    Views
    1,048

    maybe foam,but i used basswood and you can cut...

    maybe foam,but i used basswood and you can cut that fast
  19. Replies
    4
    Views
    1,048

    well ,now that you have said that it does look...

    well ,now that you have said that it does look like a raven, i just called it a house bird,not to get to specific
  20. Replies
    4
    Views
    1,048

    machining a house bird for display

    I wanted a bird for a book case shelf and decided to machine one out ,but no matter what feed rates I picked I could get this bird done in less than
    4 hrs.
    I feel the cost of this bird it would...
  21. cnc wood frames with metal plasma art inserts

    Combining wood and metal art--machined out a cedar 7/8 frame with some text
    painted the text black ,sanded off the paint slobbering and finished it with an
    exterior coat for outside.
    ...
  22. Replies
    11
    Views
    1,263

    that would be quite a trip for me ,and getting...

    that would be quite a trip for me ,and getting across the border thy might wonder how to charge
    (just joking)
  23. Replies
    11
    Views
    1,263

    I managed today to purchase some sink cutouts

    I managed today to purchase some sink cutouts
  24. Thread: 3d masks

    by stan kern
    Replies
    5
    Views
    1,310

    they come from carbide.ca and i also use 4 in...

    they come from carbide.ca and i also use 4 in ones too
  25. Replies
    11
    Views
    1,263

    you just brush it on ,2 coats then sand the whole...

    you just brush it on ,2 coats then sand the whole corian piece,takes time but leaves the letters perfect
Results 1 to 25 of 408
Page 1 of 17 1 2 3 4