Search:

bingo!!!!!!!!

Mark....Did you modify the headstock shape? I'm sure you know that Fender gets all worked up when you place your logo on their headstock shape. They defend their trademark like a mama bear defends...

Robert.....Looks real nice proportionally and also looks like a great finish. I wanted to show you how I finish the bottoms of my pieces. It looks like you are mounting your stock with a dovetail. I...

As for the hand truck, an appliance dolly is great to have.....Sooner or later, everyone that you know will have borrowed it. One thing to keep in mind is that the "foot" of these are very narrow....

Outstanding! I see that Max Schang is giving lessons at Hanna's....Say "hey" to Rae for me.

Chuck......I'm down here in Mars, PA

If you want to go the used route or stay local, try Hanna Music Supply in Harrisville, Fudoli Music in Butler....or.....Head to McKees Rocks and check out...

Minwax Antique Oil followed by a tripoli and white diamond buffing, then an application of a light wax (by hand or buff) always worked well for me.

Greg Savage
Hardwood Studio

Permalac........This is what I use on my metal sculpture....It works very well. There are some other products on this page which may work well also.
...

Robert, It was my pleasure to be able to help out.

Robert......Peppermill and PM sent!......via UPS

Cheers!

Robert.....Could you use a nice peppermill for your auction?

Cheers!
Greg

Check out the Jacobs chuck....But remember that a lot of little mis-alignments can add up to one big one.....It can be a softer spot in the wood that depresses a bit when you chuck the blank in the...

John....I've been known to make a peppermill or two. And I gotta say (assuming that your chuck is adequately gripping the blank) it is critical that your tailstock be perfectly aligned with the...

Add a bit of Japan Drier to pure tung oil to speed up the curing process.

Waterlox is a great tung oil based finish. Apply several diluted coats and then a few full strength....a little steel...

I can tell you that you must have a USDA Import Permit if you bring wood/agricultural products in from outside the US. My permit was required when I imported about 50lbs of wood from Canada. Since...

I have 3 Stihls. One of which is 25 years old....an 028. The others an 044 and an 084 are about 14 years old......never any problems. Do yourself a favor and get a Stihl....You won't regret it.

I...

Hutch.....A tax ID is good....It can save you a lot of problems should the the state dept of revenue decide to check for your sales tax ID license. I have only been checked once in the last dozen...

Matt...Welcome to the art fair world. There is not an event that you will ever participate in that is aggravation-free.

First off...What kind of an event is this?....A juried event?...Community...

Yes...It all depends on how fine of an area/void/crack you intend to inlay with turquoise. I like the dental drill because because of the size and weight of it. A Dremel can be very fatiguing on your...

I've been doing inlay with turquoise for about 15 years. I use a coffee grinder to crush the stone into varying degrees of coarseness. Turkish grind is my favorite! HA!!!!

Wait until the work...

If need be, CrushGrind mechanisms can be filled from the bottom.

Use epoxy after roughing up your plastic. It will work quite well. Don't use CA if it can be avoided....It can be very brittle and...

Will...Consider a camera another tool. You can't make pro-looking photos with a junk camera. One thing that you may want to look into is a digital SLR. Yeah, it may be a bit more $$$$ than your...

Curtis.....In all honesty, I believe you are getting into some uncharted waters. That end grain maple is already cracked and unevenly dried (somewhat). You can easily catch a tool and shatter the...

Dean....It did look like Marblewood when I saw it yesterday. I knew what it was, but just couldn't think of it....musta destroyed too many brain cells the night before!!!!!!

You really should try...

Kingwood????