I have had several GFI's go bad. But if you replace it, and have a 20 amp circuit...which is normal for garage outlets, make sure you get a 20 amp GFI. I have found many 15 amp GFI's in 20 amp...
Type: Posts; User: Gerry Werth; Keyword(s):
I have had several GFI's go bad. But if you replace it, and have a 20 amp circuit...which is normal for garage outlets, make sure you get a 20 amp GFI. I have found many 15 amp GFI's in 20 amp...
If your manual does not say, measure the thickness of your splitter with a calipers, and compare that to the width of your current or planned thin kerf blade...usually around .95 inch. I have the...
I have a Ridgid SCMS and use the laser on EVERY cut...rough or fine. Most reviews said this laser was not accurate and not adjustable. Wrong on both counts. When you start the saw, the laser is a...
For after market accuracy you can't beat the Incra 50" fence. I loved mine mounted on my Craftsman contractor saw, but have now sold. I currently have the Grizzly G691 with their Beise clone fence....
Brad,
I have had several Craftsman drill drivers, 9.6V, 12V, and now 18V. While they have plenty of power, I am not impressed with their batteries. I may just send my 18V to one of those services...
Go to Rockkler http://www.rockler.com/CategoryView.cfm?Cat_ID=2687
or probably woodworkers supply will have them.
Boeshield T-9 Spray
HF, titanium coated, work great. $29.99
http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=40062
Move at least two of those 4' sealed flourescent fixtures in your booth, and put in 6500K or 7000K bulbs. The higher the K temp, the closer to natural sunlight, which is the best light for color...
I used the two burner model on my 20# LP grill tank when I lived in IL. I easily warmed my 3 car garage to 60 - 65 when it was in the teens outside. It doesn't smell after a couple hours of use (...
Sounds like a bad arbor bearing :(
I think they did, I have the 735 that I bought used on CL. I have a bag and hose, I think, or maybe its a hose and hood for a garbage can, not sure anymore, as I have mine hooked up to a DC. Do you...
Does it look like this one? http://www.harborfreight.com/cpi/ctaf/displayitem.taf?Itemnumber=31849
I would steer clear. :o
Marty,
Its on Sears website, but you might want to read the review in the March Issue of Wood Magazine. With the optional segmented cutter head you are at $750. I have the DW 735, and highly...
I have the PC 6 gallon pancake. Works great, but it is LOUD. Craftsman makes a small 3 gal. oil type, not too loud, more than enoough pressure for nailers. Harbor Freight also sell the Central Pneu....
I have the same type of bench top as you are making, and I mounted my vise with lag bolts as I too did not want bolt heads showing through my top. I did have to use something, I would have to go...
+ 1 what Darius says. PSI offers the most CFM for the $$'s I had one for 8 years, with hard pipe to my RAS and flex pipe for the table saw, jointer, planer and band saw. I had several blast gates to...
Got one, and yes it's worth the money if you don't have any other belt/disk sander combo, like me. I've had mine for 20+ years, and I finally have to replace the PSA disks.
Jim,
I would take a lot of the globbed grease off. Just doesn't need that much. Mine actually only had a thin coating on the rack gear, and I had to wipe some off as I adjusted the 45* stop. Have...
Congrates Jim, that Rails box looks exactly like mine did. Grizzley needs to do something about their packaging. Saw is boxed well, but accessories not so much. have fun getting it set up. Looking...
First, too many responses here assume that your single outlet in the garage is a 15A circuit. Power outlets are supposed to be 20A, with 12awg wire. Check it out. 20A will easily handle the...
Rick,
There are many options for purchased and home built collection systems for SCMSs. I use the Rosseau Downdrafter. It is not cheap, and I bought the one with sliding rails attached to the back...
Jim, First, congrates on NOT having to wait for Christmas in April. If you are planning on making your own moblie base, look here for some suggestions....
You need to be careful, the pilot part of the drill bit can just poke thru the rail, and you will be okay using 1 1/4" washer or pocket hole screws in 3/4" material. I personally do not drill thru...
Congrates Jim it will be worth the wait. Christmas in April isn't so bad. I can also send some more pics of mine if you need something to drool over. :D