Search:

Type: Posts; User: stan kern; Keyword(s):

Page 1 of 20 1 2 3 4

Search: Search took 0.02 seconds.

  1. corian will be a good choice post the picture and...

    corian will be a good choice post the picture and maybe go 3/8 deep on the pocket
  2. I always used heavy_light mineral oil ,as mineral...

    I always used heavy_light mineral oil ,as mineral oil is editable
    I use it on all my cutting boards
    Available in a drugs store
  3. vetrics free file for july...pineapple fruit server

    https://youtu.be/XIcfekwg7a8

    all went well , about 35 min ,used black cherry
    good downloaded file
  4. Replies
    3
    Views
    594

    I used an electronic movement out of Guelph...

    I used an electronic movement out of Guelph Ontario at 49.99 with hands
    place called stockcade
  5. Replies
    3
    Views
    594

    large outdoor clock

    Needed an outside clock for my wife when she is gardening and tends to loose track of time
    its built from 1x9 eastern cedar 36x36 in 3/4 thick and strapped at the back cross wise with 1x4 cedar to...
  6. I had the patience because it was a winter...

    I had the patience because it was a winter project , its not the one I wanted though
    I wanted one done with driftwood but I still don't know how to fabricate the skelton to wire the drift wood on ...
  7. the horse is done and tied up to the front gate...

    the horse is done and tied up to the front gate of my shop
  8. horse called penetangore from start to finsh

    the horse is done most people have seen the 0-3 parts ,its just the last part that is new
    it was a long project but I am happy with it
    So from a cardboard lasered model to a 1/4 plywood full size...
  9. thanks to mike on the black hook like adjuster...

    thanks to mike on the black hook like adjuster idea, made 4 of them today to add to my seam pucks
    thanks a lot for posting the video
  10. ok I get your idea ,that might work my pucks...

    ok I get your idea ,that might work my pucks have pieces to grab onto
  11. part 3 horse build

    https://youtu.be/bt23QqPRMqk carrying on
  12. the hook lever is something I will add its to...

    the hook lever is something I will add its to level up the 2 corian pieces but his pucks draw into each other along with holding down
    Thanks for the idea just wish I could figure how to draw the 2...
  13. that's why I put 2 puck on sliding bars ,just...

    that's why I put 2 puck on sliding bars ,just need a small device to pull them together
  14. question "You going to implement vertical...

    question "You going to implement vertical adjustment too? "
    The commercial ones I saw did that ,but as of right now ,I don't know of any small piston type shock that a vac could pull in
    but one...
  15. construction of 2 solid surface seam vac clamps

    used 1/2 grey corian sink cut outs to make 2 vac clamps for joining solid surface pieces
    just apply the pucks at the joint and use 2 clamps to pull in on the glue joint
    takes a small vac pump 1/3...
  16. Replies
    3
    Views
    989

    slightly off topic

    A bit off cnc but I did cut the part with the cnc , my horse "penetangore " is coming along
    he is 11 hands high an Arabian young horse
    I am carving him with grinders 2 with various heads and 2...
  17. Replies
    3
    Views
    989

    flexible vac clamp

    used a vac puck on a adjustable clamp that was used for holding bird carving blanks
    works quite good , its a good addition to vac hold downs in a small shop and is cnc built
    ...
  18. Replies
    28
    Views
    18,818

    some vac ideas https://youtu.be/rSQvrg2TKzE ...

    some vac ideas
    https://youtu.be/rSQvrg2TKzE king vac puck
    https://youtu.be/i3dawJZJo4c vac press part1
    https://youtu.be/nN2Hg-YDOe4 vac press part 2
    https://youtu.be/z3Mlcffc3Oc vac press...
  19. a full size drawing saved a sa vector to machine in plasma, laser or cnc router

    I would like to demo a full sized drawing digitized on a jumbo drawing board to be machined out
    on a co2 laser ,cnc router and a plasma cutter

    https://youtu.be/kStkbykNSBs
  20. the plywood one was the model to built the solid...

    the plywood one was the model to built the solid wood one,the plywood one is about maybe 1.5 hrs on the cnc
    I was a bit careful as I never have used the full size table on my cnc .
    I was trying to...
  21. thanks here is part2 ...

    thanks here is part2

    https://youtu.be/Uqnz1n_naqY
  22. using john walsh's digitizing board to help with horse build

    https://youtu.be/Wp8zcwZRHKI drawing board digitizing parts

    started by making a 8 in cardboard model,then a 24inch heavy cardboard model and then a full size 1/4 plywood profiles
    after all...
  23. Replies
    5
    Views
    938

    this is the next part ...

    this is the next part https://youtu.be/Smmd_DIyPXc
  24. Replies
    11
    Views
    1,027

    I tried the drum skins wet and dry made no...

    I tried the drum skins wet and dry made no difference,taking them off focus helped a lot and removing the air assist
    But bottom line I don't think lasering these skins is the way to go,lasering the...
  25. Replies
    5
    Views
    938

    ok , thanks wolf sounds interesting

    ok , thanks wolf sounds interesting
Results 1 to 25 of 494
Page 1 of 20 1 2 3 4