Search:

This new Bad Axe Dovetail saw is on its way home. I can't wait. Since becoming a tool maker over 10 years ago I have not had much time to do what I really love, make furniture. I hope this new saw...

Hey guys I have found what appears to be a mint condition Disston 3 d sawvise. Is this a good vise, does it have any funny quirks that I should be aware of?

Thanks
Jeff H

Absolutely wonderful tool I would love to have one with 8 deg. bevel, safe on top and bottom with cutting edge on the bevel only. I could really use one to fine tune my marking gauges with. Do you...

I would love to get some 5/4 stock flat sawn or if i can't get that 1/2" thick quarter sawn. I am looking for 5 to 10 board ft.

Hey guys,
I have used the last piece of osage orange that I had stashed away. I had this tree milled over 10 years ago. I have been looking for more but I just can't find any. Does anyone know where...

Derek,Mark- Thank you for the compliments on the panel gauge. Mark I use the same grind on my blades that Derek uses except my blade is flat. I think that the profile of the blade can really make or...

Hey Mark this is how I mount the blade on my panel gaugeshttp://www.hamiltontools.com/product_images/l/274/pg1_closeup__12895_zoom.jpg

Had a great weekend. :) :) made a few gauges. Then worked on the interior for my 86 mazda truck, Played with the kids and watched the super bowl.Sums up a good weekend for me.
Jeff H...

Hey Steve good to hear from you. The old Texas redneck smoker works like a charm. Thanks for the great tip.....Jeff

Good morning Pam
All my gauges at this time are good old Arkansas Black Cherry. The finish is a trade secret.HA HA HA

I would like to say thanks to all that have taken a look at my gauges. I hope that the winners will put the gauges through a good work out and let us all know what they think. Good luck to all......

Brad ( I mean Jerry)
I was hoping to not tell this story but hey live and learn.
I started out by using an hvlp conversion gun. Worked great on the sealer due to fact that if you screw up it just...

T,
The bath looks great
J.

Whew it's finally done!!!!
Between long hours at work and pushing the cabinet off to do other things I finally finished this Curio cabinet for my wife. I built the cabinet from a cherry tree that...

Hello All,
Anybody have experience with the Devilbiss finishline III hvlp gravity feed sprayers? I want to step up the quality of my finishing at least a hair. :cool: :cool:

Thanks
Jeff...

Hello Pat,

This is my go at a router table. It has 2 drawers to store router accesseries, 4 drawers for router bit storage each of these drawers have rubber grommets to hold the router bits nice...

We are going home!!!!!!!!!!!!!!!!!!!!!!!
My daughter Morgan had neuro surgery Monday morning. The doc's say everything has been taken care of no sign of the vascular issue left.
I want to say a...

T,
Thanks. It means alot
J.

Hi Chris
I'm working on an idea of mounting the switch above the table center just behind the fence. I also like the foot pressure switch that Terry Hatfield uses.
Jeff H

Hi Dave,
I will have to say that the router compartment is not sealed. I have learned that my Terry Hatfield Dust Eliminator has to have lots of air to be happy or I have 1 very loud whistle. As for...

Hi Bruce,
Yes sir the rails are curved. This is my take on a semi mission style router table.
Thanks again for the prayer support
Jeff H.

Hi Jeff,
The plans are my very own. I'm gravity challenged so my table is 34" high
I looked up the length of the longest bit that I might use and made the bit storage drawer to fit. The opening to...

Steven,
I could not have put it in better words. I wanted to practice using face frame construction for a upcoming project for the LOML and thought what better to build than a router table. I will...

Hi Nathan
I attached the top trim with pocket screws and used a flush trim bit to make it just so. If you don't have a kregg or equivilent then you are missing out on a great tool the whole cabinet...

Hello all,
The table is almost complete. I'm waiting on the rubber grommlets I will be using to hold my router bits nice and tight (When I get some) router bits that is. The 4 bottom smaller...