Not Tar but Asphalt Primer and Mineral Spirits.
Type: Posts; User: Bill Rogers; Keyword(s):
Not Tar but Asphalt Primer and Mineral Spirits.
I changed the gearbox oil and it wasn't that hard to do. I used Valvoline's 80W-90 Gear Oil. Could they have put the fill plug in a more difficult spot to access? I used a straw and connected it...
I don't want to get a gallon;How much does it take?
Some how much oil does a Powermatic 15 planer take? I should change the oil in mine.
I list mine on the Free section of Craigslist as "Free Hardwood Scraps". You would be surprised at how fast they go. People use them in their Chimeras, for small projects or as kindling. It is...
As a roofing contractor, I can tell you that what we would use is NP-1 or another one part Urethane caulking.
A similar solution is to apply Denatured Alcohol over the ding and to set a match to this. I know that this sounds counter-intuitive but if you do it safely, it is an alternative method. This isn't...
You can "remove" (i.e.: lessen) dents in wood by placing a damp wash cloth over the depressions and then running a hot clothes iron over the wash cloth. You need to keep the wash cloth damp and you...
+1 on Pictures.
I had the same problem when I need to buy Min-Wax Wood Hardener around a year ago. I ended up having to buy it on line and I think that I bought it through Amazon.
How about the Magic Wine Bottle holders? You can make these out of small pieces of scrap wood and they don't take long to fabricate.
How did you cut the tenons?
I agree with your assessment of Cotton Wood. It is " soft, not strong and close grained; warps as it dries and is extremely difficult to season." Doesn't sound like a good candidate for turning!!
Mulberry is supposed to be "very, hard, heavy and durable".
I agree with Tim: Box Elder. It is a fairly soft maple that is "light, soft and close-grained; easy to work".
You can try one of my favorite two beers: Free and (or) Cold.
A friend of mine was cleaning out his garage and he found this box and part of an old Craftsman router bit. The box states that it is "For Router, Drill Press, Radial Saw".
So, how would you use...
Kathy,
I made one of these "Low-Profile Wine Racks" from plans on Woodsmith. You could alter the plans so that it held just stem ware if that is all that you need....
Sign me up, please!
Sign me up, please!
Sign me up, please.
Sign me up, please!
Sign me up, please.
Add me to the signees!
Add me to the list!
(5" long by 3/8").