Search:

Not sure what you mean by toolpath. I followed the directions I saw on u tube but it didn't work. I'll let you know if I figure it out.
Thanks

I have a 60 watt laser and I cut though 1/8" plywood with one pass. Try not using the auto focus and make sure the laser is the correct height. Sounds like its out of focus.
I use 100% power and he...

I have a 60 watt laser. I use cermerk spray and I have good results. Just cost way to much... Tried the tape and had a hard time trying to get the setting correct. Ran out of tape before I had good...

I just bought EngraveLab 9 and my support time ran out and I have a lot of questions on the commands.
I am trying to line fill a letter so I can engrave it out.
I first place a letter on my layout....

Did you try LaserBits for a new lens?
Kevin

Bert, Not sure what type of engraver you have but mine you can turn the different colors off. So I draw my box in red, insert my picture or whatever I am engraving then make sure the red is turned...

Richard,
Again thank you, I found this website and wrote to them on Friday. No word back. And no help from you know who SW.
I worked on my laser Friday and I have it working but I really would like...

Richard,
Thanks for the info. This isn't the first go around with sign warehouse. I just know my next laser is not cominf from there. I wrote to LTT but no reply, I;ll try GCC.
Thank again, its...

I need parts for my Accuris 46 Laser Engraver. Sign Warehouse will not help me and the engraver was purchsed from them. They have the worst support....EVER
Any how I could go on forever about the...

awsome job!! Does your wife think your crazy.. Great Work

I have a Meistergram 2412 rotary engraver and I use to import large drawing in AutoCad 11 or 12 and my engraving software would convert it in to a logo with a registation box, so I could engrave...

I am looking for electrical prints and information on the Accuris 60watt model 46. I have had some problems and can do my own troubleshooting if I knew what some of the LED lights were telling me. I...

I would like to engrave beer mugs but my problem is that you center the handle at the top and then figure out which side of the mug you want the engraving to be on, no problem so far. The real...

Thank you all for your suggestions. I will try some more samples and try to take better pictures if there are more issues. I am confused about the cheap glass concerns, because every artical I have...

187203187203187202
In the pictures, you can see the fading on the letters and numbers. I am using a setting of 80 power and 40 speed, 250 DPI and a 2.5 lens. Again this is using a 60watt Accuris...

Dan, I tried to take pictures of the glasses but not really having luck get a picture that shows the problem. I am starting to wonder about the actual power form the laser? When I start to engrave it...

Not sure what type of engraver you have, but one thing to try is to draw a box 1" smaller then your table then 2" inside draw a another box. Engrave the two boxes on cardboard or anything cheap and...

Dan,
Thanks for the information, I'll try that, but why not turn the power setting down or the speed up?
The manual for the Accuris is the most confussing thing you ever wanted to read. They have a...

I purchased a used Accuris Powersharp 46 it is a 60 watt laser and I am having all kind of problems engraving a 6 oz flute glass. After moving it I have aligned the home position, adjusted the aiming...