Thanks to everyone how replied. I discovered that the stop was incorrect. I was able to determine
the correct spacing and use a micrometer to set the spacing on each cut, with good results.
thanks...
Type: Posts; User: Ronald Allison; Keyword(s):
Thanks to everyone how replied. I discovered that the stop was incorrect. I was able to determine
the correct spacing and use a micrometer to set the spacing on each cut, with good results.
thanks...
Bruce, Yes the stop is adjustable, if you are familiar with this jig you probably know the set back is 1/2''. When I clamp a board in place and measure the set back it is less than 1/2''. It touches...
I just received my new Porter Cable 4216 jig. My first test cut was a half blind dovetail. After getting the router depth correct, the joint was great. However the boards were not even if stood up...
I hope this displays properly. I found more sled side play than i thought I had. Replaced the runners which eliminated the side play. That did not fix the issue. I then noticed a small amount if play...
I just finished building a box joint jig using Ed Stiles plans https://www.youtube.com/watch?v=JYxDXHGRRrk
I have a brand new Oshlun box joint blade set.
The jig is great but the joints are...