now wait a min here!...you would be surprised how much wood you can get in a trunk of a Nissan!..but you have to remember to take the receiver out of the hitch on the back bumper....the bolt of the...
Type: Posts; User: Bob Hampton; Keyword(s):
now wait a min here!...you would be surprised how much wood you can get in a trunk of a Nissan!..but you have to remember to take the receiver out of the hitch on the back bumper....the bolt of the...
well i think i found the problem ...a combo of pos fence (original) and blade height...
Its and old saw and i mostly use it with a sled for my segment work so i don't do a lot of ripping with it....
I have an older craftsman tablesaw made around 1980....contractor style..
the problem that i am running into is blade is binding in the cut..ive done all the usual checks and adjustments that i...
thanks guys for all the advice..its all good ...i spent the day trying different ideas but no joy at all ..next is another blade ...i did change the belt a few months ago to a link belt and did make...
I have an older craftsman contractor tablesaw ...its all in good working order but im having a problem with blade noise....
I have a new Irwin crosscut 40 tooth blade and its making a terrible high...
ok guys i need some advice
I have a jet 14" Bandsaw w/riser and i have a problem with the blade...
the blade runs true just running by itself..no side to side play ..no front to back play ..its...
thanks for the response guys
yes its the camlock type with the angle iron rail
guess ill have to do some checking around and see what i can come up with ...there are times when i think i can do...
ok guys i got a problem with this fence and would really like to know how to fix it ...
And no i cant go out and buy a new fancy aftermarket fence for this so i have to figure this one out.
The...
as for weight...i did a very easy solution to mine...slid a bar threw the legs and hung weight disc's from that..there cheap at any goodwill or salvation army stores.
bob
ive had my 1624 for almost 2 yrs ..upgraded from a 10 year old HF lathe...
Its been a wonderful lathe for me..I wish thou that i had got the bed extension for some xtra length...i use the factory...
Harvey
my son has one of those a/c units and it does good for a bedroom or some small room ...but here is an idea to try that i did years ago when i was in an old shop building built in like the...
would any of u have a PH# for the nova service center?
the website posts a # but its out of service..
thanks
Bob
after you fill the repair ..if your filling a crack for instance..mound it a little high over the crack and let it dry ..then spin it again and take a few VERY light cuts ..then it will blend in...
i made a little goodie awhile back and it comes in handy for NE bowls and vases ...pretty simple to make...just a piece of flat aluminum bar bent in an S curve with velcro on opposite ends to hold...
hey guys need some advice....
I picked up a little table top router table (made by craftsman) garage sale buy..anyway it missing the fence so i need to make one for it and i see in the sears website...
i'll throw another way in the mix here ...
I dont have cole jaws or longworth chuck (someday ill figure that one out and make it ) so i use a very simple way ...i use a piece of the black water...
yup pretty much...at least thats what im finding out ..the bigger better saws (I wish i had) u can pretty much buy all over..but the bench tops ..not a one.
I do a lot of small thin stuff for my...
thanks dave
that was pretty much my thought also ..but hey had to try ..never know what info u can get on here..
thanks
Bob
hey guys ..i need some suggestions on how to make a 0 clearance insert for my benchtop tablesaw if its at all possible..im not having much luck on my own trying to make one so anyone done this or...
jamie
look for a "turkey cooker" in lowes or home depot also called crab cookers ...ive seen the propane burners at lowes also
another source for the burner is a local propane company
Bob
Hi Chris
I'll give u one more to think about..the nova..either the dvr or the 1624-44 the 1624 runs about $1100 and is a very nice well built lathe..the draw back is that it is not variable speed u...
well ill join in here to i guess ...upgraded in january to this lathe from a hf34706 that i turned on for 10yrs.
very happy with it and nice to have reverse and slow speed.
regets: wish i could...
scott most use reverse for removing scratches and marks on the wood and also is handy getting at tear out grain
Gordon
there actually is an easier way to do that when u dont have reverse...buy or make a hand sander (inertia i think it what its called ) when u use these by slightly twisting it backwards or...
Hi Richard
Congrats on the lathe!
I turned on one of those for over 10 yrs and it did all i wanted to do ...
You have already hit on some good changes to make it a little better..changing the...