You should spend some time watching RR Buildings on the 'Tube. Those brackets are not "sheet metal"...they are heavy, welded steel and designed for the specific load and column size you will be using...
Type: Posts; User: Jim Becker; Keyword(s):
You should spend some time watching RR Buildings on the 'Tube. Those brackets are not "sheet metal"...they are heavy, welded steel and designed for the specific load and column size you will be using...
While Michael clarified what his process was, there's no issue with doing two coats of Rubio Monocoat, even though the word "Monocoat" indicates it's not necessary. Many folks do two to get a...
Rick, 120mm is just under 5" which is approximately 125mm. :) So yes, a 5" ID hose should slip over the 120mm port or at least be close enough to "encourage" it. But again, using a Fernco rubber...
The nice thing is that you don't have to upgrade Jerome if there's nothing compelling there, but can choose to upgrade for "the same price" whenever should some new feature really catch your eye. (I...
Cutting wet wood on the bandsaw benefits from a band that's designed for wet wood...I recall some specifications around that were on the Suffolk website...the folks who make/sell Timberwolf, but I...
If you are just screwing them into the cabinet materials directly, you can use the elongated holes to provide some level of adjustment for forward/back and up/down. If you are using the 32mm...
For the 120mm port on the Felder, a popular option for adapting is a Fernco rubber sewer adapter; 5" hose can be clamped on one side and the other slips right onto the 120mm port. I use that method...
I doubt that the nice folks at Fernco ever imagined that they would provide so much value to the woodworking world. :)
"Drying Tent". You need air flow, preferably from the prevailing winds, so if your tent isn't just a "top", you're going to have continued moisture issues with that lumber. There's a reason that...
You could certainly use dyes, etc., to emulate the tone of a specific piece of white oak, but you'd want to choose a species that's going to provide a similar open grain pattern. I say a "specific...
Seal with Anchorseal (you can get it by the gallon on Amazon) and as Izzy recommends, get it sawn as soon as possible so you can stack and sticker in where there is good air flow so it can begin...
"Holy Price Difference, Batman!" Sheesh...you need to find a friend across the border to take deliveries for you!
Yes, in general, that's exactly what you want. There have been a few examples of this posted over the years...I could be wrong, but I believe that Derek Cohen has shown one as he has a very short...
Yea, if my spam protection at the server doesn't catch something...which is rare...my MacOS Mail app gets 99% of the rest straight into the "Junk" folder.
What "base" is used also matters, not just what collarant is added
Yea, I agree. The shipping on my slider in late 2022 from Georgia to Pennsyltucky for about 1000 lbs was $1200 and that was with terminal pickup, not door to door. LTL rates are much higher due to...
Making the "windows" is an approachable task, but the opening mechanisms are a different issue, especially since you can't use a simple hinge and prop setup with them that far up in the air. No way...
Many folks with shorter stroke sliders will make use of a ripping sled on their slider wagon to increase length capacity for critical straight line rips. You still have better control than by using...
Yes, it was released mid-last week. Please note that they are offering the upgrade at the "old upgrade price" until 30 April 2024. After that, it bumps up to the new going-forward upgrade price. For...
These are well known phishing payment scams. DO not respond. DO not click on any link "in" the message. If you are concerned about a "payment" go to the normal website for the entity that supported...
I didn't have any dowel stock appropriate for the need but do have a good quantity of Total Boat resin, so that's what I went with. Since the issue was near the end of the day, letting it cure...
I don't have any issues with labels from my P-Touch sticking to anything, for the most part.
If you use Aspire 11.5x or greater, I can send you the files. PM me your email. You'll just need to change your post processor and tweak for your tooling and material, etc. I'm setting them on a...
Jimmy Diresta's latest video project is a nice exercise in metalwork, including some things he's not done previously. Two metal shop stools.
Sadly, three panels...so one complete cabinet and one half. But the recovery worked just fine and I slapped myself up-side my head to insure I don't make that mistake again. I always try to make a...