Search:

This is exactly what I did. I even marked the piece of wood to see that where I ran it over the jointer that the pencil was gone. I guess Ill have to check that part with a straight edge. I was using...

I tried doing the trick where you can flatten boards wider than your jointer by removing the guard and then using double stick tape on the part that you jointed to attach it to a flat piece of wood....

Wow, I was not thinking when I posted this. I do have a tenon going into a mortise for the center. In that case, the panel will not move it. Thanks for the input so far. I'll glue up an extra panel...

I'm building a tv stand that has raised panels in the sides. The grooves are 1/4" wide and 1/4" deep. The dimensions from the bottom of the groove to the bottom of the other groove is 7 1/4" for...

I currently have Triton's 3 1/4hp router that I plan on using for a router table. I just used it once for routing an edge on a piece and found it to big for hand held work. That being said does...

Sorry, I do not check this forum every day. I have read all of the replies and I have been taking advice from the forum anyways. Jim Koepke said he used the Veritas MKII system which lead me to the...

I was just trying to experiment with different sharpening methods. My issue was with speed and quickly establishing a new bevel. I tried a worksharp and I loved it. I just ordered one.

Anyways, I...

I'm in Southeast PA. I plan on finishing off on a strop, but what I need is something that I can quickly establish a bevel with. I think I should spend the money on a worksharp or the Veritas version...

I'd prefer something that sharpens way faster.

I have Stanley Sweetheart blades (3,4,6) and Stanley sweetheart chisels. Norton waterstones. Oilstones from sharpeningsupplies.com (their brand)

I have tried multiple ways of sharpening my plane blades and chisels. Right now I have water stones 8000/4000 1000 and a dmt diamond plate (300 grit) that I use to flatten them and to establish...