Search:

Thanks for letting me know. I'll likely just get Grizzly's motor. It's turning into too much work.

The overload engages instantly when I try to turn the collector on. The motor runs perfectly fine when holding the contactor in. On Grizzly's recommendation I have replace both the contactor, start...

This idea started when I realized the G0440 and G0441 are identical (same impeller, same housing, ...). The only difference is the motor power (2HP vs 3HP).

Thanks for all your ideas.


Edit:...

The motor of my Grizzly G0440 dust collector (2HP) is giving me trouble. It is drawing more amps than it should. If I have to replace it, I could install a larger motor. For example, I could turn my...

My Grizzly track saw did not show any of the wobble Mark shows in his video review. I am not sure if I got lucky and got a good saw, or Mark got unlucky and got a bad one.
The writeup of my review...

The important stat on the DCF680 is its low torque. This is very much a screwdriver, and not an impact driver.
24 in/lbs are not enough to driver long screws without pilot holes.

Just look at...

I have seven. Only two see regular use.

You should also look at youtube. There are a few good channels with guys doing video reviews. Tools in action, New Woodworker, Wood Whispere, ...

There are also a few woodowking tool databases...

Greg is right. Every rotary hammer has its advantages and disadvantages. You need to be more specific about what you want to use your drill for.

If you were happy with your hammer drill, Jamie's...

My Grizzly T10687 has no play in the way it glides along the track. It works as I expect it to.
They seem to have some quality issues at the factory, judging from the wide range to review feedback....

Another review of the T10687 with a few nice pictures and stats.

http://www.hingmy.com/showthread.php?5013-Product-Thread-Grizzly-T10687-Track-Saw

The gap is a result of something being out of spec/square. If the drawer is square and the slides are installed perfectly parallel, there would not be a gap.
The rear lock primarily keeps the drawer...

I'd pay extra for digital controls. They make setup so much faster.
Like someone mentioned before, if you are using your shaper in a one man woodshop, 3HP are plenty enough. A large, feature bare...

I have had a Wixey on my saw for 2-3 years now. I consider a digital fence an essential upgrade that should be installed on every saw as soon as it comes out of the box. It makes a massive difference...

For anyone with a wide face/head like me, try the Pyramex V2-Metal glasses. The metal frame can be bent for a proper fit and stay in shape afterwards. They are ~$10 on Amazon. I use these...

I have the G0441 installed in my shop. It's a great machine. You'll be very happy with it.

2) I'd go for the smaller drum, if you really can't extend your ceiling height. Maybe you can get the...

I have a 3HP model. If you want to make raised panels, do yourself a favor and get a 5HP model.
My machine gets the job done, but I am always unhappy when I use it. That's not what a hobby should be...

There are a number of small circular saws available. I like the Porter Cable model, because it puts the motor inline with the base plate for a compact body. The blade is close to the front edge of...

The entire 1023 range is a great value. My performs flawlessly.
If you don't like it, these saws keep their value very well. They do well on CL in my area.

If you already have a benchtop mortiser, I'd save my money for a floor standing model. There is a big difference in power, and features between a benchtop model and floor standing one. Sure, a better...

Both the DW and the Bosch are available at Home Depot. You have get a feel for them there.

I don't like the way the base plate is mounted on the Colt. It does not look very sturdy to me.
I have...

You should get a plywood blade. You'll need it sooner or later.

I use the Forrest Duraline HI/AT blade for plywood cuts.
It produces zero tear out with a good zero-clearance table saw insert.

The Grizzly 1023RL is a fine saw for the money they charge.
With a good sliding table the saw takes care of anything I need it to do.

If you want something larger, I'd skip right to Felder or...

Looks real good.

Properly adjusting the cutter head is hard at first. I keep a gauge block around that has properly cut joint.
Once you have that block, use it to align your cutter head.

I use tilebond and regular gold coarse thread wood screws.
The result is plenty strong.

Pre-drill all holes to avoid splitting.