Had the same saw in '79, that fence had deflection, sold that saw and went with a PM that had the T-style and had no deflection. I did try the Incra style fence on the cabinet saw I have now, that...
Type: Posts; User: Ted Miller; Keyword(s):
Had the same saw in '79, that fence had deflection, sold that saw and went with a PM that had the T-style and had no deflection. I did try the Incra style fence on the cabinet saw I have now, that...
Chuck, I did order a few other extrusions directly from 80/20 in different thickness and they all had a lot of deflection, 42" and 48".
When I spoke with Jeff @ VSCT about the way the 4 locking...
I did purchase one of these fences and it turned out to be one of the worst tools I have bought in a long time. The deflection on this set up was terrible. The four locking nuts all in a row holding...
John, I had my eye on either the Super Dust Gorilla or the Pro series from Oneida. My old cannister 2hp 110v single stage was just a PIA to keep the cfm high. I was constantly cleaning the cannister....
Rick, Yes that is not under load, I know all these tools will pull a bit more under load. When I get some help in my shop I will be able to post amp draw under load.
When I spoke with Woodmaster...
Will, I had a wynn filter on my single stage for years, it needed a lot of cleaning quite often. Then I switched over to a JDS canister with flaps. I would then only clean the filter when the lower...
Jim, Vortex cones are sorta like adding a upside down wok to just below your intake on a single stage DC.
I just added to my shop a 3hp cyclone due to my Woodmaster 2675 drum sander needed a lot...
The main reason for the amp draw test is I only have one 30 amp 220v circuit in my shop. Running the cyclone and of course another 220v machine from that same circuit. I stayed with my single stage...
I know this thread is extremely old, but I just set my Oneida Pro 1500 up in my one man shop and did a amp draw test yesterday. I have a 7" main line 10', to 6" line 10', to 5" line 12' to the TS....
I needed to upgrade my BS for some veneer work, needed more resaw. I called Rick @ Laguna and I purchased a demo LT18 3000. Well after getting the unit to my shop and quite a few hours of working to...
Mike, If I know the stock is prone to chip out, I either climb or bump cut. When you climb cut you do not feed the stock into the rotation of the bit, so on a table you feed the stock left to right....
Derek, Call Rick Kerrigan @ Laguna, I have worked with him for years and he has never let me down...
+1, But the braces do help a bit, but the table is not very stable with or without the braces unless you are cutting small stock.
I removed the legs from my MFT/3. When I need to make large...
Jamie, If you still need a cord(s), let me know, I have way to many. Pay shipping and you can have the cord for free.
I am south of you in OC...
What a great man:
http://www.legacy.com/obituaries/providence/obituary.aspx?n=john-r-lucas&pid=139986386
I use orange hand cleaner, brush it on let it sit for 10 minutes, clean off under warm water with a toothbrush.
You would be surprised the guys that think their blades are dull when they actually...
Mark, Head over to Austin Hardwoods in Santa Ana. You will never have to go anywhere else for alot of choices.
Pay attention to Craigs List as well, I pick up lots of material for almost nothing...
I use 12" blades, but anyways:
Orange hand cleaner, spread on each tooth, gullets anywhere you see stains using a toothbrush, wait 10 minutes, scrub under warm water using same toothbrush. Teflon...
It's like shopping at the super market, I just go for deals. One kid had a few tables with two Freud router bit cases with a post it note said 1/2 off all bits. Bought 30 bits for $57.00 cash. Allpro...
The law says you are "not allowed to watch tv while ripping on the TS, but you can text message while ripping".
Oops, sorry, I got that mixed up, here in lunatic California, "while driving you...
Alan, We got a Woodcraft in Stanton on Beach blvd and the 22 and the Rockler is in Orange off the 55 and Katella on Tustin Ave...
Bob and Dan, Please just add him to "ignore" it's not worth wasting your time by responding.
Lets help Alan by keeping his thread on topic...
Scarf at 10 degree and you will not even see it...
Never ever ever refuse any delivery you get. Mark down as much as you can on the BOL. After the driver leaves take all the pics you can, even if the crates are in great shape, take pics anyways....
Mike, I have had the same sander for well over a year, and with all the profile pads it makes my life so easy. Paper last like no other due to the dust collection and I can get into any spot.
Not...