I had exact same issue, I went to autozone and got a Pully puller for $20, it clamps to backside of puller and using a large wrench it pushe s a screw against motor shaft and pulleys come off no...
Type: Posts; User: Matt Follett; Keyword(s):
I had exact same issue, I went to autozone and got a Pully puller for $20, it clamps to backside of puller and using a large wrench it pushe s a screw against motor shaft and pulleys come off no...
I got it at a place called J Freeman , five minutes from where I work outside of boston. This stuff you definetly want to buy local, shipping would be astronomical, if you google HDPE sheets for you...
That is kegerator 2.0, complete with my modified Hurst t-handle shift knob for tap handle. First one was a free fridge that died, spoilling $100 dollars of keg beer, this one was a scratch and dent...
It is quite flat, and in 3/4" format extremely heavy, even a little heavier then a 3/4" sheet of mdf. More importantly the thickness is very unform. HDPE is fairly flexible, so it definetly needs...
I attached top to the table using pocket screw through the legs into the bottom of the HPDE so the top is completely smooth. I then rounded over the top and bottom edges.
I need to share my luck. So I have an assembly table, essentially a beefed up version of Norms worktable. For the top I had a 3/4" piece of mdf coated with Poly, poplar edge banding worked well...
I love the triangular design as oposed to a protractor style. Grip tape face is a plus also, no need for clamps even on miters
I have a 1980ish 113. saw from sears, I bought this extension from sears and love it, it is cast iron, 12 inches wide (most are only 10) and bolts right on. I got mine with free shipping, but it is...
I like the length and rigidity, also the adjustments seemded very simple to me. Extremely pleased with it
I have a porter cable ROS, I bought a 6 foot length of 1.25 inch shop vac hose that has a 1.25 outlet with 2.5 inlet, hooks right up to my shop vac, I got it at the BORG where they sell the shop vac...