Search:

I've had the PC trim saw for years and to me, you can't beat it. Found out about a year ago that Forrest makes blades for it, so now it's splinter-free cuts on all types sheet goods.

Try this.............

Height 60 feet
Diameter 14 inches

Diameter in feet / 2 = 0.58 feet
(14” / 12” = 1.16) / 2 = .58 feet

Area of tree cross-section = above number squared x 3.14 =...

A few months ago, the son of a friend bought some cabinets from Lowes for his condo.......2 lower & 5 upper, for around $3,000.00. (yeah, I know) They then wanted $5,500 to install those 5...

.........gets my vote. 90 to 45 miter to 90 to 45 bevel to 90 and all are dead on accurate. will cut a 4 x 12 in a single pass at 90. I've had mine since they came out and would buy another in a...

I've had mine for at least 15 years. Set it at 90 degrees when I got it and never moved it, so I haven't had the problems that most complain about which is getting it back to 90 after cutting miters...

Unless he has 6 table saws, I guess we can look for them on e-bay for $200 each in the near future. Lowes ran a sale on Delta 13" planer blades a while back and every store in my area was sold out...

Just my opinion, but I don't think the Jet has been out long enough to really know how durable it is and how long it will run problem free, whereas the Tormek has a long proven track record. In 10 -...

What I have done in the past for tools in good physical shape and completely serviceable is usually 50% of replacement cost. And that goes for all optional equipment or add-on items. I haven't had...

The Number you wrote is 1/100th of 1/1,000,000th......which I find very hard to believe. Sounds like "salesman" talk to me, especially for a product made in China. Back when I was a machine tool...

Gail,

This has to be one of the best pieces you have done (so far) and is absolutely beautiful. I love the color and the finish.........

Is the lattice work on the doors mortise & tenon or are...

If they are following the Biesemeyer model, the commercial fence is "beefier" than the home shop version.

From the Biesemeyer site:

Home - Fence tube is 1 1/2" x 2 1/2" Front Rail is...

When you had your major kick-back, did you have a splitter on your saw? I'm still trying to figure out what the big advantage of the riving knife is, other than a little convenience. My splitter...

If it's any type of power tool, I just tell them that "my insurance agent told me that I would be liable if anyone got hurt (including doctor bills, hospital bills and lost wages if they missed work)...

I'm in the process of finishing my basement shop (after 14 years) and I'm going with T-111. While the material cost is high, the installation time & effort is minimum. I also like the fact that I...

This was taken directly from the "Specifications" page of the SawStop website:

Dado diameter: 8" (requires a separate brake cartridge)
...

I've had my LS1013 for about 4 years now and it was dead-on out of the box and hasn't moved since. Since I'm only a hobbiest, I don't know how it would hold up in a production environment, but it has...

I absolutely would NOT accept that trim as it is. He would either replace it or I would be detucting from the amount I owed him. Since you are the one who is responsible for caulking/painting, you...

I don't remember where I saw this, but I'm about to do it in my basement shop.......

Stuff 6" of noise control bats up between the joists; nail 3" - 4" wide plywood strips to the bottom of the...

I've had mine almost as long as Norm and the wobble stops as soon as the drill bit makes contact with the wood. Since I am basically drilling a clearance hole & countersink, any slight error really...

I might just be my paranoia or huge fear of fire, but there is no way I would have a gas fired furnace in my shop. Dust in the house would be the least of my worries..........

But, I'm no expert...

Mark,

I don't believe that you have said what type of furnace that is. Is there any type of flame inside, which I personally think that would present a dangerous situation. Also, even with good...

Something like this??

http://www.amazon.com/Eurekazone-Inc-SRK-Smart-Router/dp/B0009UBVAE/sr=1-28/qid=1169653209/ref=sr_1_28/105-3490664-5876404?ie=UTF8&s=hi

What level of load/draw did you have on that cord?? What was the wire size of the extension and how long is it?? The reason I'm curious is that I have one of those retracting cord reels in my shop...

Look at it this way: If you bought her an item of clothing that she really didn't like, didn't want or wouldn't buy for herself, would she keep it & wear it?? If you can honestly answer yes to that...

For what it's worth...........This is going to be my choice when I upgrade my current contractors saw. Best trunion out there........

Just my opinion

...