Thanks..looks like it will work. Got me thinking.. I could always tear apart my hole puncher and use it. Then I sound a cheap hole punch set kit. Don't know why I did not think of this sooner.
...
Type: Posts; User: Richard Temple; Keyword(s):
Thanks..looks like it will work. Got me thinking.. I could always tear apart my hole puncher and use it. Then I sound a cheap hole punch set kit. Don't know why I did not think of this sooner.
...
Hi All: I am making a wall clock with a thick card stock paper dial. How would one go about making a nice clean center hole cut for the mechanisms? Hand paper hole punches will not reach center,...
Well... just shot the first coat of shellac. Reduced 50% and it seems to work ok. Alot easier than brush..... Ah.. brings back those car painting days!
Lots of over spray. And had to adjust the...
Hello:
I use to paint cars and have a nice Sharp spray paint gun with pressure gauge that comes out the bottom when it sprays. Have 3 hp air compressor to supply it.
Has anyone ever used these...
Works!!
I must have had a loose lead in the junction box. Trying to get all those thick wires together.
White is buss is connected to ground buss in the panel.
Thanks for all of those who...
fOK.... let follow the wires. Also on a sheet of paper.
Black wire…From one side of the breaker we go along.... come to the junction and hang a right to go down to the planer outlet. Also...
Mike and Tom:
I'm with Tom, from your description,it sounds as if you wired the two motors in series with each other electrically. They need to be electrically wired in parallel across the 240...
Some how is it when I hook up the wire to the planer..... Nothing. Thought the breaker might be bad... so I hooked up to old 20 amp that I knew worked and just turned on the DC... nothing.
Took...
Do a search about the affects of wood dust on your lungs. I would go with .5 micron if possible.
White is ground.
Red is breaker
Black is breaker.
Bare ground not used.
In the panel I have red to one side of breaker and black to other side.
2 pole 220v 30 amp breaker.
The DC did not work. I finally took out the planer wire and spliced DC wire together and DC...
Great forums... thanks to all for your input.
Was running the DC on 220V 20amp using #10 wire. Wanted to attached planer into this circuit. Planer = 15 amp draw. DC = 13 amp draw. So I cut...