Search:

Try this site WWW.woodbin.com, click on utilities then click on drawer sizer. It takes a few minutes to learn but it does the math and prints it.

Sometimes putting on a light coat of chalk dust works.

That's a really beautiful boat. For some technical advice on epoxy go to www.westsystem.com They make epoxy and have been building epoxy boats for years.

If you decide to go forward on your request for a variance you should be prepared for a few questions from the folks who grant them. They may ask about roof water run off and where it will go, will...

I use both. I have metric and inch scales and tapes and the digital height gage switches back and forth, so what's the problem ?

I just retired with 34 years in a prototype shop and have seen a ton of injuries most of which were caused because of people having too much pride to ask for help. When the old Rockwell Int'l Delta...

No it's not sticker stain or spalting. It is only visible after the wood is sliced. I was hoping to use it for stairway trim, I'll just monitor it for a few weeks.

I just started resawing some 8/4 ash that was kiln dried then stored in a garage for several year and inside the wood there is a grayish color that I've never seen before. The wood has an internal...