If you have a Bosch, or Siemens, dishwasher in your home, be sure to check as to if yours was recalled because of an overheating element. My neighbor's house started on fire last week from his Bosch...
Type: Posts; User: James Suzda; Keyword(s):
If you have a Bosch, or Siemens, dishwasher in your home, be sure to check as to if yours was recalled because of an overheating element. My neighbor's house started on fire last week from his Bosch...
I wouldn't try doing a 1000 feet of flooring with a router table and a table saw unless you have a lot of time on your hands. I did one job for a guy who had a bunch of air dried red oak that he...
Trying to stay warm! Way too cold in the unheated garage/workshop. I've got some water in a pail and there is a thin ice crust on the water. :(
The first thing I notice is how much harder the machine is working, or in the case of the 735 the feed rollers start to slip a little.
Daren,
I used to use roller stands also, but went to full tables so the board would be supported for the full length. Also when I was planing 16 foot boards I was always running to catch one of the...
I'm going to throw some ideas against the wall to see if any of them stick.
One thing that will cause chatter marks with the Woodmaster is if you do not support the ends of the boards and they...
Visit this website and forum. (Nice folks there!)
www arboristsite com
I would say about 75% of these folks use Stihl.
Right tilt are better because both Norm Abram and David Marks use RT saws! :D
Here is a link for a nice design for a 16/32 sander.
http://benchmark.20m.com/tools/PmaxSander/toolspmaxsander.html
My 1023 does the same thing with certain saw blades. One thing I noticed is if the belts are too tight on mine, it seems to vibrate more on shutdown.
But, I have come to the realization that as...
Son and I will be doing a different kind of woodworking again this weekend. We'll be cutting firewood about 50 miles west of you. (Unless it rains too hard!)
If you want to check out some neat designs for teardrop campers check out these.
http://home.centurytel.net/edevold/]
I see by the postings you are still having problems with your WoodMaster. I have a question/statement to make.
Do you have full length infeed and outfeed tables for your Woodmaster? I'm not...
Thanks for the hint. I just may do the same thing.
Ed,
My advice would be to grab the 16/32 for the $400. As for that red handled tool, I've got one and never use it. I found it was easier just to use my finger. But, if you have large fingers you...
I've got a Rikon 10-340 which is the older version of the 18" saw and for the most part I'm very satisfied with it. The only problem I have with it is when I try to adjust the lower guide rollers....
I've got one, and my son has one. Although I don't use mine that often. If you decide to get one be sure to order the router bit chuck for it.
The 1035 makes a super router table for big router...
Is there anyone out there who has one of these small Clarke saw kits? Are they any good to use as small saw to cut sheet goods, or other light jobs?
One of the local stores has a sale on them and...
George,
Your chair DID turn out great! I'm happy that I was able to provide you with someone to do the upholstery! BTW, that is a great view out the widow of your northern home! I hope you can now...
The next time you are at one of the BORGs pick up a 4" adjustable metal elbow. Slip that over the DC fitting and adjust the angle so it points to the side and slip your DC hose onto it.
Works for...
Has anyone successfully put casters under a “Captain’s bed” that were usable enough to be able to move the bed around on carpet.
I’m thinking about designing a bed with a storage unit under it,...
Well Mike if the WD40 and 400 wet/dry didn't work for you, try my method of using Lemon flavored Simple Green and a 320 grit sanding disk if you have a variable speed orbital sander.
When I got my...
First of all I hope you marked the shims as to where they go when you put the top back on your saw. If you didn't you will have to do a little "fiddling" to get things back into place and in...
Are you asking me?
I've got a 16' long straight metal straight edge that is screwed to a 16' long 1/2 x 8 inch wide laminated piece of plywood. I have a saddle that holds my circle saw so it will...
I do mine just the opposite as David. I plane my stock first, then rip it to size after straight line ripping one edge.
BTW, make sure you use the correct cutter first on your pictured profile. ...