Search:

I built the norm router station, but I didn't like the dust collection. So I took one of those cone shaped dust ports and put it under the router lift. then took a small piece of hose and attached it...

has anyone built a philadelphia Wing Chair? if so, where can I find some plans?

Philip,
PA cherry is darker and red in color. Most of the cherry in Iowa is pinkish. And you kind find small mills that charge .60 a bdft. I also like the small mills because the wood has...

I was worried about the moisture as well, so I'm laying down 5 mil plastic under everything. And yep thanks the article in FW

I have a one car garage and have the same issue with heating. My walls and ceiling are all insulated and sheetrocked, but my floors get really cold. so I'm going to try the floating floor that was in...

Have you looked at the dehumidification kilns? simple design, quick stable drying and compact design.

next time get some pictures.

try a program called snapstream. I've had it since it first came out and it's great and easy to use. costs about $50. I have it hooked to my sat. and ant. aand it just sits there and records, I can't...

I have the Jet and it works great. small 400 sqft shop.

I have the jet 12" jointer/planer and love it. Small and powerful, and great for my 1 car garage shop. can't beat having a 12" jointer, I buy rough lumber, and also cut my own and alot of the boards...

finewoodworking has one it's it latest issue. I changed the planes a little, took out the shop vac and put in drawers - need the storage. having a shop thats a one car garage requires tools to be...

Tung oil and wax.

I just got the 1016 about a month ago and love it. I cut alot of 12" rough lumber(mahogany, oak, walnut and cherry) and have seen no flex - it is very smooth. I like the ability to move the laser on...

CO2 because it stores in the bottle as a liquid and turns into a gas as you use it, which means you have alot more CO2 in the bottle than you could put just air.

1 - Dual core is better than single core (I think), but why?

- doesn't really matter with your useage, but It's getting harder to find single processor systems and there isn't a real cost...

I use:

1.) General Finishes Brown Mahogany Gel Stain. Just dark enough to give a consistant color, but not too dark that the grain gets covered
2.) Ruby Shellac - 2 coats.
3.) Wipe on poly.
...

Best price and quality www.shellac.net

Mike,
That would be great, Thank you

Bob,
Yes please, 6' and green is no problem especially at that price.

All,
I live in Iowa and looking to make a road trip to PA for some cherry Lumber. I'm looking for those small mills that only locals seem to know about, Not the big mills like hearne. Basically...

www.buy.com good prices.

thanks Ryan, totally missed it as I was skimming through the replys.

Edward,
what did that board cost, i"ve heard that wood from "The Tree" was running up around $200 Bdft - if you could find anyone that would part with it.

put everything on wheels, and put up a lot of shelves. small spaces can work fine, just need the space for what your working on. I wheel out the tool, do the work, put it back.

at least 50%, my average board size is over 8". I moved up to a JJP-12. no more cutting boards down to fit.