Search:

413881

Bonus: "Made in the USA"

Link: http://www.sidewinderreels.com/our-cord-reels/sidewinder-reel-sw-i/I purchased from Brookstone (Chapter 11, Bankruptcy, August 2018) in the 1980s a...

Hi Jim,
Unfortunately the point in time when I undertook this replacement was a major move of 2 houses and this was a quick diversion project. I cannot remember any distinction between the blown...

I have a Delta 50-760 dust collector. In my move, I seemed to have lost or misplaced the snap-in ring that is used to hold the lower clear plastic bag. I've search high and low and cannot find that...

I was laboring under the mistaken belief there was only one real American manufacturer of cyclone dust collectors. I remember when consumer cyclone dust collectors were just getting momentum in the...

I'm going to be placing a workshop in a garage that has 2 bays + 6' and I would like to have the ability to flow out into the yard from the back of the garage. The front of the garage goes into a...

Pallet vs. a Skid. Concisely explained: http://www.custombuiltpallets.com/pallets-vs-skids.php

Edit - added: http://www.timbermen.net/products/pallet-design.html There is software called...

I will be shipping some large tools and my wood shop and plan to make my own crates and skids.

Found this video which was very instructional.

What are members of this forums suggestions for...

After posting this, I was discussing this with the little wife who wondered what a replacement motor costs versus a new unit. I was describing what I experienced - noise and smoke, and she said "Oh,...

I have a Fein Turbo (I?) model 9.77.25 that I bought in 2003 (I think) that gave up the ghost. In 2003, this was the top-rated shop vacuum in Fine Woodworking. It's been a joy. I contacted the...

I studied Baltic Birch more and see they have a 3mm product, so I've ordered a sheet to try out. Thank you, again.

I hadn't thought of that, but yes, a very thin Baltic Birch ("BB") would be a candidate -- though the adhesive in it makes it heavy. I want to minimize the weight load on the Epson body so as not to...

I have an Epson T5000 ink jet printer that takes up to 36" wide paper. It can accept roll paper or large cut sheets. I am going to be feeding into it cut-sheet paper that is 25" x 38"; the 25" edge...

The emergency I envisioned would be one of the marriage... breaking the case and opening the letters and drinking the port might remind them of something they once shared.

A labor of love for my son and his bride:
http://imgur.com/a/m9UBG#0

Woodworker glues together six-sided color pencils and makes a ring. Interesting and colorful design.

See http://imgur.com/gallery/VFOfu

Wine barrels come in a variety of sizes and shapes, the only standardization seems to be a range of capacity, e.g. 55-60 gallons. Such a device would need to be adaptable to a variety of curves.

Hi Jerry (neighbor),

Yeah, the idea of taking a 60 lb item and maneuvaring it around a 2 pound item is the tail wagging the dog. I don't want to have to buy another specialty tool, especially...

Yes, the staves will come loose, but they will retain their shape if treated carefully and you minimize the force on the edge just cut. When you fill the half barrel with soil, the pressure of the...

It looks like the picture is upside down? I've edited it to clarify:287803
So the Cheez-It is the face of the table pointing upwards, the can is sitting on the grey ground.

How would place the...

One issue to address is that final few inches of the completion of the cut... what happens to the previously stable barrel? It collapses and its two halves roll about when its structure is so...

Actually, I was thinking of having the wheels on a stem that could adjust so the face of the wheel is tangent to the surface of the barrel is comes in contact with -- more traction and hopefully less...

A friend of mine had what looked likes an upside-down wagon with four wheels standing up in the air set to a box on the ground. You place a wine barrel in between the four wheels and then you can...

I have some Allen set screws that are used to level a fence for a shaper. There are four screws that basically tilt a metal bar against another bar that is not necessarily perpendicular to a table. ...

After reading the reply about three equidistant points on a diagonal will always determine a point on the center line if the two end points intersect the parallel edges of a rectangle, I envisioned...

Of course: that works. And I don't need to know the midpoint of the long dimension, just having a mark somewhere on the center line of the width dimension is precisely what I am seeking. Make a pin...